- FOOT PEDAL
- 10' x 8" REMOVABLE FLANGES
- 12' DIE HOLDER & DIE IN LOWER
- GOOD CONDITION
-
EQUIPPED WITH: -
EQUIPPED WITH:- Automec CNC Back Gauge, Model CNC-1000
- 8 ft Die Holder
- Pedestal Stand Foot Pedal w/ Dual Palm Buttons
-
EQUIPPED WITH:- Hurco Autobend & CNC Back Gauge 2 Axis
- Euro and American Top Die Holders
- Bottom Die Holder
- Light Curtain
-
EQUIPPED WITH:- AUTOMEC CNC 150 SINGLE AXIS BACK GAUGE
- PALM BUTTON/FOOT SWITCH
-
EQUIPPED WITH:- DRC SINGLE AXIS PROGRAMMABLE BACK GAUGE
- TWO SPEED RAM
- FOOT PEDAL & PALM BUTTONS
-
EQUIPPED WITH:- Cincinnati 2-Axis CNC Control
- Back Gauge (X-24", R-8")
- 6' Lower Die Holder
- Electric Foot Switch
-
EQUIPPED WITH:- PALM BUTTONS
- LIGHT CURTAINS
- FOOT PEDAL
- LINCOLN LUBRICATOR
- FINE TILT
- NO BACK GAUGE
-
EQUIPPED WITH:- ELECTRIC FOOT SWITCH
- HURCO AUTOBEND 7 CNC BACK GAUGE
- GOOD CONDITION
-
EQUIPPED WITH:- 25" DI-ACRO CNC GAUGING SYSTEMS
- TONNAGE CONTROL WITH GAUGE
- ADJUSTABLE PRESSURE CONTROL
- SELF CONTAINED HYDRAULIC SYSTEM
- ELECTRIC FOOT SWITCH OPERATION
- GOOD CONDITION
-
EQUIPPED WITH:- Under power on our floor!!
- Hurco Autobend 7 CNC back gauge
- Banner Safety light curtains & 2-operator control system
- Can be set for operation by (1) or (2) operators
- (2) Dual palm button pedestal control stands
- (2) Foot pedal controls
-
EQUIPPED WITH:- Cyblec 3 axis CNC control
- X control
- Y1, Y2 control
- R control
- crowning control
- Power clamp ram
- Wila Crowning attachment
-
EQUIPPED WITH:- Automec CNC 99 2-axis control includes storage for 99 jobs with up to 30 bends per job
- backgauge retract, Inch / metric programming, Manual / automatic operating modes and
- Tonnage control
- Portable foot pedal
- Full length die holder
- Inch / single stroke mode
- Lubrication system
-
EQUIPPED WITH:- Hurco Autobend 7, 2 axis CNC control with memory for 600 programs and 2,400 bends. Tool library for 45 punches and dies, RS232 interface & Programmable retract.
- Portable foot pedal
- Full length die holder
- 3 position ram control
- Tonnage control
-
EQUIPPED WITH:- 176 Ton x 12' capacity
- Delem DA 56s 4 axis control + crowning
- Fiessler laser light curtain
- Chrome molly 4 sided die and gooseneck punch
-
EQUIPPED WITH:- THREE SPEED HYDRAULIC POWER UNIT
- FINE TILT ADJUSTMENT
- PALM BUTTON CONTROLS
-
-
-
EQUIPPED WITH:- Lower Die Holder
- Palm Buttons
- Foot Pedal
- Merlin Light Curtains
- Autogage G24 2-Axis Back Gage
- 50 HP Main Motor
- Wired for 3 Phase, 60 Cycle, 440 Volts
-
EQUIPPED WITH:- ADAPTIVE AUTO FORM 5-AXIS COMPUTERIZED GAUGING
- LIGHT CURTAIN
- 4-WAY LOWER DIE (1", 1-12", 2" , 2-1/2" OPENINGS)
- NO PIT REQUIRED
- CROWNING
-
EQUIPPED WITH:- 2-Axis Hurco Autobend 5C CNC back gauge & control
-
EQUIPPED WITH:- 2-axis CNC control and back gauge
- Microguard light curtains
-
EQUIPPED WITH:- Accurpress AP2 X,Y CNC Control, Manual Z
- ETS pedestal
- Die Rail
-
EQUIPPED WITH:- HURCO AUTOBEND #7 CNC BACKGAUGE
- TONNAGE CONTROL
- REMOTE FOOT PEDAL
-
Includes: Hurco CNC Back Gauge, Model Autobend 5C 4 Way Bottom Die - 1", 2", 3", 4" Openings - 12 ft x 5-1/4" OD Block Misc. Tooling Electric Foot Switch FOB: New Jersey -
Model No. 7608 Equipped With: Automec CNC 300 Auto Back Gauge Accurpress ETS200 CNC Control Merlin ISB Safety Light Curtain Operator's Control Station Rear Access Safety Cage Foot Pedal Actuator Miscellaneous Dies Operator's Manuals 10-HP Motor 460/3/60 Excellent Condition -
Equipped With: Flush Floor Mounted Hurco Autobend 7 CNC Back Gauge Manual Crowning Die Holder Light Curtains Palm Buttons Floor Electric Foot Control Location: MD -
Capacity: 90 Tons Overall Bed Length: 12’/144″ Distance Between Housings: 10’6″ Stroke: 8″ Open Height: 15″ Closed Height: 7″ Throat Depth: 7″ Hurco Autobend 6 CNC Backgauge & Control Motor: 15 HP -
YEAR: 1981 PALM BUTTONS AUTOGAUGE CNC 1000 MISCELLANEOUS TOOLING WIRED 480V MOTOR 25 HP 220V/440V 3 PH Overall Size, Approximate: 121"(LR) X 46"(FB) X 121"(H) Weight, Approximate: 16500 Lbs. -
1968 - 300 Ton Pacific Model 300-16 Hydraulic Press Brake, 16' OA, 14' 6" BH, 12" Stroke Location: OH NOTE: No Back Gauge or Safety Curtains. 34" Pit is Required. -
MODEL: 230ASX6FT AUTO SHAPE CONTROL 2 AXIS CNC BACK GAUGE DUAL PALM STANDS 9'LR X 6'6" FB X 128" TALL FLOOR STANDING 35 HP MOTOR AND HYDRAULIC PUMP LOCATION: OH -
Equipped with: CYBELEC MODEVA PAC CNC CONTROL AUTO SHAPE C AXIS CNC BACKGAUGE LIGHT CURTAINS FOOT PEDAL LOWER DIE HOLDER 2 FRONT ARM SUPPORTS KLEENTEK DOC R25SP OIL CLEANER CROWNING Location OH -
Equipped with: Automec CNC 300 2-axis 24" backgauge (holds 300 programs with 32 bends per program, Inch - metric conversion, Bend allowance, RS232 interface, Teach mode, Ram angle mode, Tooling library, Gauge retract) Single cylinder design for full tonnage across entire bed. Hydraulic tonnage control. In line depth stop. Full length die holder. Portable foot pedal. -
Includes : 4 Way Die - 14 ft Long Electric Foot Switch Control Location: NY -
EQUIPPED WITH: HURCO AB7 CONTROL FOOT PEDAL SHEET SUPPORT ARMS Location: CA. -
Equipped with: NC9EX-II 3- Axis CNC Control Upper and Lower Tool Holders Electric Foot Switch Controls Location: NY -
DESCRIPTION: 385 Ton X 12’ CNC 9-Axis Extended Stroke/Throat Press Brake with Accurpress Vision CNC Controller, 6 Axis Back gage, CNC Crowning, Hydraulic Ram Clamping, Hydraulic Die Clamping, Full Rear Gage Guarding & Lighting with Remote Operator Palm Station/Foot Pedal Pedestal -
Includes: Hurco CNC Back Gauge, Model Autobend 5C 4 Way Bottom Die - 1", 2", 3", 4" Openings - 12 ft x 5-1/4" OD Block Misc. Tooling Electric Foot Switch -
Equipped with: CYBELEC MODEVA PAC CNC CONTROL AUTO SHAPE 5+ AXIS CNC BACKGAUGE LIGHT CURTAINS FOOT PEDAL LOWER DIE HOLDER 2 FRONT ARM SUPPORTS KLEENTEK DOC R25SP OIL CLEANER & CROWNING -
Equipped with: 24" AUTOGAUGE G24 2 AXIS CNC BACK GAUGE PALM BUTTONS WEDGE ADJUSTMENT VARIABLE SPEED & TILT ADJUSTMENT -
Equipped with: 3 AXIS CNC BACK GAUGE HIGH SPEED BC 45 CONTROLLER MERLIN LIGHT CURTAINS FOOT PEDAL UPPER AND LOWER DIE HOLDERS MANUAL QUICK DIE CLAMPING & ANTI - DEFLECTION TABLE -
Equipped with: FLOOR STANDING FOOT PEDAL & 24" HURCO AUTOBEND 6 CNC BACKGAUGE Year 1987 -
Equipped with: PALM BUTTONS 150 LITER OIL RESERVOIR ELGO 2 AXIS CNC POWERED BACK GAUGE 2000 MANUFACTURED -
Serial # 3955/7485 Year: 1995 Includes : -- Misc. Tooling -- Remote double foot switch on flexible cable -- Motor and Controls. Emergency stop palm button. Key-lock switch for ON/OFF for the power supply and for the selector of modes of operation. -
MFG: 2000 MODEL 200 PF-II OPERATOR STAND ALLEN BRADLEY PANEL VIEW 550 CONTROL MOTOR: 40 HP -
Model: 713012 Year: 1995 Equipped with: 2-axis Automec CNC 99 backgauge control ETS 100 portable pedestal with palm buttons Tonnage control Light curtains Drilled and Tapped holes in bed 3 T-slots front to back in bed Full length die holder -
Model: 160-12 Year: 1981 Equipped with: 30” Front operated manual backgauge Single, run, jog mode Speed adjustment Rear safety barrier Light curtains Portable foot pedal Large assortment of tooling Full length t-slot in bed Drilled and tapped holes in bed and ram -
Model: 175CB X 12 Year: 1994 Equipped with: Hurco Autobend 7 single axis CNC control (store up to 600 jobs / 2,400 bends, Tool library, Simple job mode for quick bends) Tonnage control. Manual ram tilt. (3) 24" front sheet support arms. Inch, single, and automatic mode. Manual R axis. Palm buttons mounted on ram. 3 speed ram Full length die holder. Portable foot pedal. Machine requires a 5" deep slot in the floor -
NEW 1999 MODEL: CBII 230-12 -
MODEL: J225-14 VERY GOOD CONDITION -
MFG: 1985 MODEL 35-72 CAPACITY... 35 TONS BED... 72" -
MFG: 1999 MODEL PRDC-150-3100 CAPACITY...165 TONS -
Manufactured Year: 1986 NC9EX CONTROL CAPACITY................................ 110 TONS OVERALL BENDING LENGTH.................. 122" DISTANCE BETWEEN END FRAMES............. 100" -
MFG: 2002 EQUIPPED WITH: OPERATORS STAND WITH PALM BUTTONS FOOT PEDAL MANUAL SET BACK STOP DIE RAIL FRONT MATERIAL SUPPORT ARMS MISCELLEANOUS TOOLING -
Year: 1981 Model: 160-12 Equipped with: 30” Front operated manual backgauge Single, run, jog mode Speed adjustment Rear safety barrier Light curtains Portable foot pedal Large assortment of tooling Full length t-slot in bed Drilled and tapped holes in bed and ram