• Backstand Grinders

    Backstand Grinders (2)

  • CNC Grinders

    CNC Grinders (3)

  • Cylindrical Grinders

    Cylindrical Grinders (4)

  • Rotary Surface Grinders

    Rotary Surface Grinders (2)

  • Spindle Grinders

    Spindle Grinders (2)

  • Surface Grinders

    Surface Grinders (9)

  • The BG214 dual 3 x 132 inch heavy duty backstand grinder other features are easy access design that allows the operator to access the 14” x 3” contact wheel with full left to right movement so they can snag, roughing, contouring, angles and shaping 10HP 3PH 220V or 440V motor, isolation pads, replaceable v-belts. Location:  MI
  • The BG14 backstand grinder is a powerful 10HP 3PH unit with a 70 duro 14″ x 3″ contact wheel. This unit has easy setup, easy backstand tracking, easy clean out, vacuum attachment, magnetic switch, parts table, replaceable parts and isolation pads. The BG14 is great for steel foundries, aggressive grinding, descaling, deburring, and finishing. Location:  MI
  • EQUIPPED WITH: Machine Control: Fanuc 21-GA Incremental Downfeed, Servo Driven Rough, Fine and Sparkout Feeds Programmable Dress Cycles with Wheel Compensation Automatic Overhead Wheel Dresser Coolant System with 20" Wide Paper Media and 10" Wide Magnetic Drum and Sludge Catch Pan Static Type Wheel Balancing Unit (2) 10-1/2" Long Wheel Balancing Arbors (2) Wheel Grinding Hubs (16) Steel Leveling Screw Pads Tool Box with Assorted Wrenches and Miscellaneous OEM Operators Manual with Foundation Print and Schematics OEM Parts Manual Built-In Input Power Transformer to Convert 3 Phase, 60 Hz, 230/480 Volt Input to 200Volt Machine Requirement Test Run on and Presently Wired for 480 Volts Input OVERALL SIZE OF COMPONENTS: Machine with Chuck: 149" LR x 126" FB x 98" High on 4" Blocks x 17,200 Lbs. Coolant System: 64" x 55" x 29" High x Estimated 700 Lbs. Wheel Dress in Box: 19" x 27" x 21" High x Estimated 150 Lbs. Location:  PA
  • MODEL: MG12-M   NEW: 1984 EQUIPPED WITH: HAND FEEDS 12" WHEEL SWIVELING WORKHEAD OPTION WITH 90 DEGREES SWIVEL, ALLOWING FOR FACE GRINDING OPS AUTOMATIC LUBRICATION FOR WHEELHEAD AND CARRIAGE WAYS ELECTRICAL CONSOLE ATTACHED TO MACHINE COOLANT SYSTEM 3 H.P./3/60/230-460 VOLT WHEELHEAD MOTOR ** SWING DOWN I.D. ATTACHMENT W/SPINDLE AVAILABLE FOR AN ADDITIONAL COST * * EXCELLENT CONDITION & APPEARANCE (ORIGINAL PAINT) * * INSPECT UNDER POWER **
  • MODEL: MG12-HA NEW: 1979/REFURBISHED 2018 EQUIPPED WITH: HYDRAULIC TABLE TRAVERSE AUTOMATIC INFEED @ TABLE REVERSAL VARIABLE DWELL @ EACH END OF TABLE MOVEMENT HYDRAULIC RAPID ADVANCE AND RETRACTION OF GRINDING WHEEL MYFORD WORKHEAD W/DUAL LIVE/DEAD SPINDLE LATER STYLE WORKHEAD, CAN USE MYFORD 4C COLLET SYSTEM INFINITELY VARIABLE WORKHEAD SPINDLE SPEEDS AUTOMATIC LUBRICATION FOR WHEELHEAD AND CARRIAGE WAYS MYFORD 4C COLLETS FOR THE WORKHEAD SEPERATE ELECTRICAL CONSOLE CONTROL 3/60/220-440 VOLT MOTORS MACHINE IS WIRED FOR 220 VOLTS ** SWING DOWN I.D. ATTACHMENT AVAILABLE, PRICE AVAILABLE UPON REQUEST.  
  • Machine Model No. ACC-1224DX New Date: 1992 EQUIPPED WITH: Servo Driven Down Feed Auto Incremental Down Feed for Both Surface & Plunge Operations Dual Rate Auto Down Feed with Coarse & Fine Selections Digital Display for Vertical Axis Spark Out Passes (0 to 5) Auto Table Park at Completion of Grind Cycle Electronic Hand Wheel for Manual Vertical Movement with Each Graduation Equivalent to .00001", .0001", .001" Power Rapid Wheel Positioning Hydraulic Table Traverse Automatic Cross Feed 12" x 24" Fine Pole Electromagnetic Chuck Coolant Tank & Pump with 20" Wide Material Filter System Tank Size: 32" x 39" x 6" Deep (Approx. 32 Gallon Capacity) No Piping, Unit is on Wheels 1/8 HP Motor, Wired for 3 Phase, 50/60 Hz, 230/460 Volts 5 HP Spindle Motor, Wired for 3 Phase, 60 Hz, 230-460 Volts Currently Wired for 460 Volts
  • Equipped With: • Hand operated longitudinal table traverse and wheelhead advance/retraction • Motorized workhead with screw-type drawbar, Myford type 3C collet, and dead center spindle (capable of live center operation with live center assembly) • Tailstock with half center • Table mounted dresser • Wheelhead counterweight • (1) Extra wheel • Coolant system with external coolant pump and tank (10 Gallon) • 1/4 H.P 3/60/220 volt DC workhead motor • 2 H.P 3/60/220-440 volt grinding wheelhead motor and electrical controls • Machine is wired for 220 volt operation • Machine manuals Approximate Weight (Machine Only): 1500 Lbs. APPROXIMATE DIMENSIONS: 50” x 40” x 60” H
  • Equipped With: • Hand operated longitudinal tabletraverse and wheelhead advance/retraction • Motorized workhead with screw-type drawbar, Myford type 3C collet, and dead center spindle (capable of live center operation with live center assembly) • Tailstock with half center • Table mounted dresser • Wheelhead counterweight • Coolant system with external coolant pump and tank (10 Gallon) • 1/4 H.P 3/60/220 volt DC workhead motor • 2 H.P 3/60/220-440 volt grinding wheelhead motor and electrical controls • Machine is wired for 220 volt operation Approximate Weight (Machine Only): 1500 Lbs. APPROXIMATE DIMENSIONS: 50” x 40” x 60” H
  • EQUIPPED WITH: 15 HP 3/60/220-440 VOLT SPINDLE MOTOR 7" VERTICAL RANGE (STANDARD) SELF-CONTAINED COOLANT SYSTEM (WET BASE) 16" ELECTRO-MAGNETIC CHUCK BRAND NEW "MAGNA-LOCK" "FLUXMASTER V" VARIABLE HOLD NEUTROFIER CONTROL MACHINE COMES WITH A NEW "RADIAC" GRINDING WHEEL WHEELHEAD HAS RAPID RAISE & LOWER BY POWER INTERLOCKED WITH FEED. MACHINE IS PRESENTLY WIRED FOR 3/60/220 VOLTS SPECIAL NOTE: THIS MACHINE HAS BEEN REFURBISHED IN 2018. WE TOOK THE MACHINE APART, PERFORMED A THOROUGH SERVICE, EVALUATED AND CYCLED THE MACHINE, THEN RE-PAINTED THE MACHINE. THE NEW NEUTROFIER CONTROL WAS PURCHASED & INSTALLED.
  • MODEL: HS155R YEAR: JANUARY 2002 CONTROL: GE FANUC 15MB
  • Mfg 1988 Model ICG100 2005 Retofitted With Fanuc "No Grinding Spindle Currently With Machine" Special 30 Day price $150,000.00
  • New 1987/1988 Model 900/400 Facegrinder Capacity 24" x 96" "Special 30 day price $75,000"
  • EQUIPPED WITH:
    • ACU-RITE D-200 2-AXIS DIGITAL READOUT
    • 6” X 18” PERMANENT MAGNETIC CHUCK
    • BIJUR ONE-SHOT LUBE
      SHIPS FROM: PA
  • EQUIPPED WITH:
    • 6" x 18" Magnetic Chuck
    • Coolant System
    • Lamp Attachment
      SHIPS FROM: WA
  • EQUIPPED WITH:
    • Walker Ceramax 6" x 18" Permanent Magnetic Chuck
    • Heavy Duty Console Cabinet Base
    • Wheel Mount
    • Wheel Guard
    • Work Light
      1-HP Spindle Motor 208-220/440/3/60   SHIPS FROM: CT
  • EQUIPPED WITH:
    • "New" Fine-Division" Permanent Magnetic Chuck
      STANDARD FEATURES
    • Hand Feeds - Manual operation model
    • All castings are tempered and stress relieved twice to assure stability of the machine structure and resist deflection under load
    • Hardened and ground column ways with cast spindle slide is precision fit for no "hang-up" gravity downfeed
    • 3 HP V3 Grade spindle motor for powerful output to achieve precision
    work standards and better grinding capability
    • Cartridge spindle with four preloaded class 7 P4 bearings and run-out
    of taper nose better than 0.000060” T.I.R. provides quiet, vibration free operation for better workpieces accuracy
    • The table traverses on linear ball bearings with hardened and ground guide ways to ensure a smooth and easy movement of the table
    • Double V cross ways are hand scraped and Turcite coated for greater flatness and high wear resistance
    • Indexable table handwheel for ease of operation
    • Vertical handwheel at the waist level
    • The automatic lubrication system continuously floods saddle and column ways, bearings, and leadscrews for better machine performance and less maintenance
    • Wheelhead variable spindle speeds as options
    • 0.000050” Micro downfeed and micro crossfeed as options
    • Voltage requires 220V/440V/3 Phase/60 Hz., prewired 220V
    *** 2003 Machine in Superb Condition - Very Quiet Spindle, Smooth Table ** SHIPS FROM: NJ
  • EQUIPPED WITH:
    • "SOKKI" DIGITAL READOUT DISPLAY FOR THE VERTICAL AXIS, CROSS AXIS SCALE NEEDS REPAIR
    OR REPLACEMENT
    • OPTIONAL FINE FEED KNOBS, FOR BOTH CROSS & VERTICAL AXES
    • ROLLER BEARING TABLE W/ADJUSTABLE TENSION
    • LOCKING MECHANISM FOR THE CROSS-SLIDE
    • "BIJUR" ONE-SHOT LUBRICATOR
    • 6" X 18" "O.S. WALKER" "CERAMAX" FINE-DIVISION PERMANENT
    MAGNETIC CHUCK
    • WORK LIGHT
    • 1 HP 3/60/220-440 VOLT "POPE" "SUPER-PRECISION" DIRECT DRIVE SPINDLE
    • MACHINE IS PRESENTLY WIRED FOR 460 VOLTS
    SHIPS FROM: NJ
  • EQUIPPED WITH:
    • 6" X 18" FINE-DIVISION PERMANENT MAGNETIC CHUCK
    SHIPS FROM: MI
  • EQUIPPED WITH:
    • ROLLER BEARING TABLE
    • 6" X 18" OS WALKER FINE DIVISION PERMANENT MAGNETIC CHUCK
    • 1 HP/3/60/220/440 VOLTS SPINDLE MOTOR
    • DIRECT DRIVE SPINDLE
    • FULL CAST IRON BASE
      SHIPS FROM: NJ