Item #15571A Clausing 20” Drill Press Single Speed and Two Speed 3 Phase Voltage

Clausing 20” Drill Press

Mechanical Vari-Speed Series
2274 20” Floor, 300-2000 RPM Mechanical Vari-SPD,
3MT, 3 Phase Voltage (208,230,460) –  $5,145.00
2275 20” Floor, 200-1300 RPM Mechanical Vari-SPD,
3MT, 3 Phase Voltage (208,230,460) –  $5,145.00
2276 20” Floor, 150-2000 RPM 2 SPD Motor, Mech Vari-SPD
3MT, 230/3/60 – $5,395.00
2277 20” Floor, 150-2000 RPM 2 SPD Motor, Mech Vari-SPD
3MT, 460/3/60 – $5,395.00

EVS Series
2274EVS 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT
230/3/60 and 220/1/60 Volt – $5,635.00
2274EVS4 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT
460/3/60 Volt – $6,110.00

CNC Power Feed Series
2279CNC 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT
230/3/60 and 220/1/60 Volt w/CNC Power Feed Unit – $10,110.00
2280CNC 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT
460/3/60 Volt w/CNC Power Feed Unit – $10,585.00

Optional Accessories

1897 Key Type Chuck (1898 required) – $ 165.00
1898 Arbor for 1897 – $25.00
2215-1A-CNC CNC Dual Palm Button Cycle Start Single SPDL – $995.00
2216 Head Lift Mechanism – $615.00
2293AMT 43” Column in Lieu of Standard 66” – $85.00
2349AMT 90” Column in Lieu of Standard 66” – $215.00
7044 Coolant System for Floor Drill – $480.00
2371MT Mag. Starter Motor 110v Start/Stop Buttons – $1,040.00
(not required if ordering EVS or CNC Version)
2375MT 2 Speed Reversing Drum Switch and 2371MT (2276&77 only) – $1,270.00
2377MT Reversing Drum Switch and 2371MT (2274&75 only) – $1,300.00
302 Start/Stop Foot Switch for Spindle includes 2371MT – $1,155.00
(2274&75 only)

302R1 Start/Stop Foot Switch for Spindle, Rev Drum SW,
includes 2377 (2274&75 only) – $1,585.00
302R2 Start/Stop Foot Switch for Spindle 2 Spd Drills
Rev Drum SW, includes 2375MT (2276&77 only) – $1,585.00
303E E-Stop Switch (Mag Starter Option Required) – $375.00
(not required if ordering EVS or CNC Version)
7022 Magnetic Base Work Light – $110.00
20-LED 3 Watt 200 Lumen LED Work Light (head installed) – $110.00

Description

Standard Features & Equipment:
• 200-1300 rpm or 300 to 2000 rpm single speed motor to drill 7/8” large holes, small holes to spot face, counterbore and ream.
• 50-2000 rpm EVS and CNC Series gives more torque for drilling large 1” holes to small holes, spot face, counterbore and reaming operations.
• Greater capacity too, with Clausing Drills, production rated 7/8” in steel.
• Heavy-duty precision head…all bearing surfaces are precision bored simultaneously for exact alignment. Eight ball bearings support the drive and spindle, lower spindle bearing has a double row to absorb both radial and thrust loads.
• 3MT spindle…with 6-1/2” travel, 2-1/2” diameter quill and micrometer depth stop.
• 4” column with ½” thick wall for great rigidity and accuracy.
• Floor Drill has a precision ground 22” x 19” oil trough table, handles large parts and fixtures.
• Clausing Drills are equipped with a Spindle Guard that locks in an upright position, away from the spindle nose for easy tool changes.
• SK-208 Top Mesh Belt Guard for greater operator safety.
• Three V-belts and a cog belt transmit positive power to the spindle (manual VS).
• EVS and CNC direct drive belt transmits greater torque to the spindle.
• Variable and spindle pulleys are fully machined and balanced.
• Clausing’s heavy-duty drive delivers full power to the spindle at all speeds.
• Motors are NEMA frame sizes 182 and 184

Clausing 20” Drill Press Specifications
Capacity, hand feed – 1 ¼” diameter
Production rated, with optional power feed, 1 ½ hp motor – 1 1/8” in cast iron, 7/8” in mild steel
Drill to center of circle – 20” diameter
Spindle nose – No. 3MT, 1.74” OD
Spindle travel – 6 ½”
Column – Ground steel, 4” diameter, ½” thick wall
Quill – Ground steel, 2 ½” diameter
Quill return spring, capacity – 40 lbs.
WORK TABLE
Working surface – 22” x 19 ½”
Table slots – Two, 15 ½” long, for ½” T-bolt
Table slot center distance – 9”
Table travel, one setting – 20”
Spindle to table, maximum – 33 1/8”
COLUMN BASE
Working surface, ground – 15 ½” x 13”
Base T-slots – Two, 13” long, for ½” T-Bolt
Base T-Slot Center Distance – 9”L
Spindle to base, maximum – 43 3/8”
Shipping weight, approximate – 630 lbs.
Overall Dimensions: 22″ x 36″ x 69″

Location:  MI

 

Reviews

There are no reviews yet.

Be the first to review “Item #15571A Clausing 20” Drill Press Single Speed and Two Speed 3 Phase Voltage”

Your email address will not be published. Required fields are marked *