Item #16003A ENSHU EV-650A VERTICAL MACHINING CENTER WITH, APC PALLET CHANGER, New 1996

$32,500.00

1 in stock

New 1996
Control: Fanuc 16MB

EQUIPPED WITH:

AIR/OIL COMPENSATED HIGH SPEED SLIDE TRAVEL
SEVERE DUTY DESIGN
COOLANT THROUGH SPINDLE
SPINDLE FLOOD COOLANT
BED FLUSH COOLANT SYSTEM
5 HP HIGH PRESSURE COOLANT PUMP
AIR FLOW SYSTEMS MIST COLLECTOR
RENISHAW OMM OPTICAL RECIEVER FOR SPINDLE PROBE INSTALLED
AND OPERATIONAL (DOES NOT INCLUDE PROBE)
PALLET CHANGER WITH (2) PALLETS
SPINDLE AIR CURTAIN
SPINDLE OIL CHILLER
SPINDLE LOAD METER
MANUAL PULSE GENERATOR
SPINDLE SPEED, FEEDRATE, AND RAPID TRAVERSE OVERRIDES
DOOR INTERLOCK
ONE SET “M” CODES
HELICAL INTERPOLATION
INCH/METRIC SWITCHABLE CAPABILITY
TOTAL ENCLOSED SPLASH GAURD WITH MANUALLY OPERATED DOOR
3-AXIS GLASS SCALES
AIR BLOW OFF SYSTEM
OPTIONAL STOP PANEL SWITCH
BLOCK SKIP PANEL SWITCH
COOLANT TANK & CHIP CONVEYOR

1 in stock

Description

Pallet Size (2)………………………: 39.5″ x 24″
X-AXIS ……………………………..: 43.6″
Y-AXIS ……………………………..: 25.5″
Z-AXIS ……………………………..: 25.9″
DIST. FROM TOP OF TABLE TO SPINDLE NOSE ..: 7.9″ – 33.88″
DIST. FROM FRONT OF COLUMN TO SPINDLE
CENTER LINE ………………………..: 26.4″
FEEDRATES:
RAPID TRAVERSE (X/Y/Z) ………………: 787/787/591 IPM
JOG FEED RATE ………………………: 0 – 157.5 IPM
CUTTING FEED RATE (X/Y/Z) ……………: 0.04 – 394 IPM
THRUST:
X,Y, AND Z-AXIS …………………….: 3,300 LBS.
SPINDLE TAPER ……………………….: CAT 50
SPINDLE BEARING DIAMETER ……………..: 4.3″
SPINDLE SPEED RANGE (STEPLESS) ………..: 20 – 6,000 RPM
SPINDLE RAMP-UP TIME (SECONDS) ………..: 3.4
SPINDLE HORSE POWER ………………….: 20/10 HP
SPINDLE TORQUE ………………………: 352 FT./LBS.
RIGID TAPPING (MAX. RPM)………………: 3,000
LUBRICATION TYPE …………………….: PERMANENT
GREASE PACK
COOLING TYPE ………………………..: OIL CHILLER
ACCURACY:
POSITIONING (FULL STROKE, ALL AXIS) …..: 0.0004″
REPEATABILITY ………………………: +/- 0.0002″
MOTORS:
SPINDLE MOTOR ………………………: AC 15 HP CONT.
20 HP/30 MIN.
FEED MOTOR (X/Y/Z) ………………….: 3.9 HP
AUTOMATIC TOOL CHANGER:
TOOL CHANGE METHOD ………………….: DOUBLE ARM,
SIDE MOUNTED
TOOL SHANK TYPE …………………….: CAT 50
TOOL RETENTION KNOB …………………: MAS TYPE II
TOOL STORAGE CAPACITY ……………….: 30 ATC
TOOL SELECTION TYPE ———————- RANDOM,
ABSOLUTE ADDRESS
MAX. TOOL DIAMETER/ADJ. POCKET EMPTY ….: 4.9″/7.9″
MAX. TOOL LENGTH ……………………: 15.7″
MAX. TOOL WEIGHT ……………………: 33 LBS.
TOOL CHANGE TIME (TOOL TO TOOL) ………: 2.5 SEC.
TOOL CHANGE TIME (CHIP TO CHIP) ………: 6.6 SEC.
AUTOMATIC PALLET CHANGER:
PALLET WORK SURFACE …………………: 39.375″ x 24.4″
MAX. PALLET LOAD ……………………: 3,300 LBS.
NUMBER OF PALLETS …………………..: 2
PALLET CHANGE METHOD ………………..: CHAIN TYPE
PALLET CHANGE TIME ………………….: 45 SEC.
MAXIMUM LOAD ON PALLET ………………: 1,100 LBS.
TEE SLOT WIDTH ……………………..: 18MM
DISTANCE BETWEEN TEE SLOTS …………..: 4.9″/125MM
NUMBER OF TEE SLOTS …………………: 5
TANK CAPACITIES:
HYDRAULIC FLUID …………………….: 2.6 GAL
LUBRICATION FLUID …………………..: 0.5 GAL
POWER SOURCES:
ELECTRIC POWER SUPPLY ……………….: 220AC/3/60
MAX. POWER CONSUMPTION ………………: 65 KVA
COMPRESSED AIR ……………………..: 58 – 116 PSI
WEIGHT (W/O PALLET CHANGER)(APPROX.) …..: 21,400 LBS.
SIZE (W/O PALLET CHANGER)……………..: 118″ x 146″ x 120″
PALLET CHANGER WEIGHT WITH PALLETS …….: 7,000 LBS. APPROX.
SIZE (WITH PALLET CHANGER) ……………: 178″ x 146″ x 120″

Reviews

There are no reviews yet.

Be the first to review “Item #16003A ENSHU EV-650A VERTICAL MACHINING CENTER WITH, APC PALLET CHANGER, New 1996”

Your email address will not be published. Required fields are marked *