• Equipped With: INCH & METRIC THREADING 14" 4 JAW CHUCK CHIP PAN Location:  OH
  • MODEL HSM14 FOR CUTTING ALUMINUM AND OTHER NON-FERROUS MATERIAL WITH STEEL BLADE. 14" high speed mitre. 5HP TEFC, 3PH motor with magnetic starter, 3450 RPM. Please specify voltage. For non-ferrous only. Wt.750 lbs. Optional: 1,725 RPM motor. FOB:  MI
  • Model 3RSP 180/6 Standard Equipment: Hydraulically powered rear bending roll adjustment Electronic digital readout for rear bending roll position Hydraulic drop end Powered lower roll adjustment, with rapid gap adjustment Dual rotation controls - console mounted and remote hand control on trailing lead Upper and lower pinch rolls driven Cone bending attachment Powered tilting of the rear bending roll for cone bending Emergency stop cable at front and rear of machine Hydraulic oil, tools and manual Grooves in lower rolls for 1/4", 3/8", 1/2" FOB: Maryland  
  • MODEL HS1414 high-speed “straight-cut" non-ferrous saw. 5 HP, 3 PH 220 or 440 volt. Motor RPM 3450. Optional: 1,725 RPM motor. Wt. 250 lbs. Optional: 1,725 RPM motor. FOB: MI
  • MODEL KM10HS 10" high speed non-ferrous mitre saw. 3 HP TEFC, 3 PH 220/440V (please specify voltage) or 3 HP 1 PH 220V. Manual switch. Wt. 300 lbs. Dimensions L 25 x W 24 x H 17. LESS BLADE. FOB: MI
  • ~Additional state sales tax may apply~ Item Number BSV-20VS 2 hp motor runs on 220-volt single-phase power. Wide 20.5" throat depth. 12.375” maximum cutting thickness. Accepts standard .25” to .75” blades. Cast iron table can pivot front to back and left to right. Includes a cast iron mitering system, rip fence, and protractor to make sure your cuts are straight and repeatable. Variable speed from 65 to 1640 fpm allows you to adjust the speed for cutting wood, metal, and even plastic. Change the speed with the hand wheel (just turn right for higher speed, left for lower). Digital readout lets you see the exact blade speed, so you can choose the right settings for your material and extend blade life. This band saw includes everything you need to cut out the center of the material without having to fix a cut through it. Manual shear lets you cut the blade, so you can run it through the workpiece, then weld it back together. Comes standard with a fully-integrated blade welder with a built-in grinder for finishing the weld joint—great for getting to the center of a cut or repairing blades. Thick steel plate framework minimizes vibrations to deliver accurate cuts and helps the machine last for many years. Air blowdown system cools the blade and keeps the saw clean from material chips and shavings. Halogen work light lets you see what you’re cutting more clearly.  
  • ~Additional state sales tax may apply~ Model #BSV-24 Accepts most standard blade widths from .25” to .75”. Offers 4 speeds, ranging from 80 to 318 fpm. Robust 2 hp motor runs on 220-volt single-phase power. Reliable gear-driven transmission saves you from having to replace broken belts or pulleys. Uses tungsten carbide blade guides as well as fully sealed ball bearings for smoothness and durability. Our adjustable blade guide design allows you to get as close as possible to the material for accuracy. We designed this vertical metal cutting band saw to let you cut out the center of the material without having to cut through it. Includes a blade welding station, complete with a shear and grinding wheel, for getting to the middle of a cut or repairing broken blades. Front panels give you easy access for blade alignment. 24” x 22” milled cast iron table pivots 10° front to back and 15° left to right for chamfer cuts. Electro-welded steel plate construction keeps the machine stable, minimizes vibrations, and maintains accuracy. Bright halogen work light helps you see exactly where the cut is. Location:  WI
  • EQUIPPED WITH: ADJUSTABLE RAKE ANGLE FRONT OPERATED POWER BACK GAUGE FOOT SWITCH BALL TRANSFERS ELECTRICAL: 460V/3PH/60HZ MOTOR: 20 HP  
  • Standard Equipment: Two Speed Hydraulic Drive Hydraulically powered Lower and Side Bending Roll Adjustment Portable Control Console mounted on Wheels Hydraulic drop end Powered tilting of side bending rolls for cone bending Electronic Digital Readouts to indicate position of both side Bending Rolls
  • Clausing 20” Drill Press Mechanical Vari-Speed Series 2272 20” Floor, 300-2000 RPM Mechanical Vari-SPD, 3MT, 1 Phase Voltage (115,220) Capacitor Start  - $5,145.00 EVS Series 2274EVS 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 230/3/60 and 220/1/60 Volt  - $ 5,635.00 2272EVS 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 115/1/60 Volt - $6,100.00 CNC Power Feed Series 2279CNC 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 230/3/60 and 220/1/60 Volt w/CNC Power Feed Unit -  $10,110.00 2281CNC 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 115/1/60 Volt w/CNC Power Feed Unit - $10,585.00 Optional Accessories 1897 Key Type Chuck (1898 required) -  $ 165.00 1898 Arbor for 1897  - $25.00 2215-1A-CNC CNC Dual Palm Button Cycle Start Single SPDL -  $995.00 2216 Head Lift Mechanism - $615.00 2293AMT 43” Column in Lieu of Standard 66” - $85.00 2349AMT 90” Column in Lieu of Standard 66” - $215.00 7044 Coolant System for Floor Drill - $480.00 2371MT Mag. Starter Motor 110v Start/Stop Buttons - $1,040.00 (not required if ordering EVS or CNC version) 2377/1MT 1 Speed, 1 Phase Reversing Drum Switch w/ 2371 - $1,385.00 (not required if ordering EVS or CNC version) 302 Start/Stop Foot Switch for Spindle includes 2371MT - $1,155.00 (2272 only) 303E E-Stop Switch (Mag Starter Option Required) - $375.00 (not required if ordering EVS or CNC versions) 7022 Magnetic Base Work Light - $110.00 20-LED 3 Watt 200 Lumen LED Work Light (head installed) - $110.00 Location:  MI
  • Clausing 20” Drill Press Mechanical Vari-Speed Series 2274 20” Floor, 300-2000 RPM Mechanical Vari-SPD, 3MT, 3 Phase Voltage (208,230,460) -  $5,145.00 2275 20” Floor, 200-1300 RPM Mechanical Vari-SPD, 3MT, 3 Phase Voltage (208,230,460) -  $5,145.00 2276 20” Floor, 150-2000 RPM 2 SPD Motor, Mech Vari-SPD 3MT, 230/3/60 - $5,395.00 2277 20” Floor, 150-2000 RPM 2 SPD Motor, Mech Vari-SPD 3MT, 460/3/60 - $5,395.00 EVS Series 2274EVS 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 230/3/60 and 220/1/60 Volt - $5,635.00 2274EVS4 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 460/3/60 Volt - $6,110.00 CNC Power Feed Series 2279CNC 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 230/3/60 and 220/1/60 Volt w/CNC Power Feed Unit - $10,110.00 2280CNC 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 460/3/60 Volt w/CNC Power Feed Unit - $10,585.00 Optional Accessories 1897 Key Type Chuck (1898 required) - $ 165.00 1898 Arbor for 1897 - $25.00 2215-1A-CNC CNC Dual Palm Button Cycle Start Single SPDL - $995.00 2216 Head Lift Mechanism - $615.00 2293AMT 43” Column in Lieu of Standard 66” - $85.00 2349AMT 90” Column in Lieu of Standard 66” - $215.00 7044 Coolant System for Floor Drill - $480.00 2371MT Mag. Starter Motor 110v Start/Stop Buttons - $1,040.00 (not required if ordering EVS or CNC Version) 2375MT 2 Speed Reversing Drum Switch and 2371MT (2276&77 only) - $1,270.00 2377MT Reversing Drum Switch and 2371MT (2274&75 only) - $1,300.00 302 Start/Stop Foot Switch for Spindle includes 2371MT - $1,155.00 (2274&75 only) 302R1 Start/Stop Foot Switch for Spindle, Rev Drum SW, includes 2377 (2274&75 only) - $1,585.00 302R2 Start/Stop Foot Switch for Spindle 2 Spd Drills Rev Drum SW, includes 2375MT (2276&77 only) - $1,585.00 303E E-Stop Switch (Mag Starter Option Required) - $375.00 (not required if ordering EVS or CNC Version) 7022 Magnetic Base Work Light - $110.00 20-LED 3 Watt 200 Lumen LED Work Light (head installed) - $110.00
  • EQUIPPED WITH: 8" 3-Jaw Power Chuck Fanuc OiTC Control Tailstock Parts Catcher Foot Pedals Manuals RS-232 Flood Coolant Work Light 7/10 HP Main Motor Wired for 3 Phase, 60 Cycle, 220 Volts Overall Size: 104" L-R x 66" F-B x 75" High x 9,500 Lbs.
  • Year:  1988 EQUIPPED WITH: 48" CNC BACKGAUGE 12' SQUARING ARM ELECTRIC FOOT SWITCH CONTROL WEIGHT: 28,600 LBS
  • EQUIPPED WITH: Audemi PGP-401 Touch-N-Go Back Gauge Control 48" Back Gauge Sheet Support System 10' Squaring Arm Location:  CA
  • EQUIPPED WITH: Front Operated Powered Back Gauge Ball Transfer Table Electric Foot Pedal 20 Horsepower Location:  CA
  • Equipped With: 36" FRONT OPERATED POWERED BACK GAUGE 2 FRONT ARM SUPPORTS FRONT OPERATED MANUAL RAKE CONTROL.(.002"-.026") FORWARD / REVERSE SINGLE / JOG AND CONTINUOUS MODES 1" x 3" KNIVES Location:  OH
  • Equipped With: Flush Floor Mounted Hurco Autobend 7 CNC Back Gauge Manual Crowning Die Holder Light Curtains Palm Buttons Floor Electric Foot Control Location:  MD
  • Yr:  1964 Equipped With: - 24" Rear Operated Manual Back Gauge - 4' Squaring Arm - Full Length Foot Treadle
  • EQUIPPED WITH: FRONT OPERATED POWER BACK GAUGE FRONT SUPPORT ARM SQUARING ARM FOOT PEDAL Location:  NJ
  • EQUIPPED WITH: - FRONT OPERATED POWER BACK GAUGE WITH FINE WHEEL ADJUSTMENT - FOOT PEDAL - BIJUR LUBRICATION SYSTEM Location:  NJ
  • Equipped With: S2 SERIES 2-POINT STRAIGHT SIDE PRESSThe Stamtec S2 two-point straight side press (a.k.a. double crank press) is designed for stamping large parts or ones that require a large bed area to accommodate progressive or transfer dies. Oftentimes, these types of operations require high tonnage, high flywheel energy, maximum frame or bed rigidity, or some combination thereof. The path of the slide is guided by eight full-length, ninety-degree gibs with nickel-bronze wear plates, offering maximum control, a high degree of accuracy and ease of adjustment. Location:  OH
  • STANDARD EQUIPMENT INCLUDES: 9" PUNCH THROAT, MANUAL PUNCH ALIGNER, 4 WAY-24" LOW RAKE FLAT BAR SHEAR BLADES, ELECTRIC FOOT CONTROL, 2-1/4" STRIPPER, - L, 150 & 500 SERIES PUNCH & DIE ADAPTOR KIT THAT ACCEPTS UP TO 2-1/4" DIA PUNCHING VARIABLE ELECTRIC STROKE CONTROL, FLAT BAR SHEAR TABLE, GREASE BANK, CHOICE OF NOTCHER IN 4TH STATION; OF A PIPE, SQUARE OR V COPER NOTCHER PRICE DOES NOT INCLUDE ANGLE SHEAR BLADES 7-1/2 H.P. 3 PHASE 220/480 VOLT MOTOR ALSO AVAILABLE: SAME AS ABOVE, 7-1/2 H.P., 1 PHASE, 220 VOLT MOTOR Location:  MN
  • STANDARD EQUIPMENT INCLUDES: 9" PUNCH THROAT,MANUAL PUNCH ALIGNER, 4 WAY-24" LOW RAKE FLAT BAR SHEAR BLADES, ELECTRIC FOOT CONTROL, 2-1/4" STRIPPER, - L, 150 & 500 SERIES PUNCH & DIE ADAPTOR KIT THAT ACCEPTS UP TO 2-1/4" DIA PUNCHING VARIABLE ELECTRIC STROKE CONTROL, FLAT BAR SHEAR TABLE, GREASE BANK,PRICE DOES NOT INCLUDE ANGLE SHEAR BLADES 7-1/2 H.P. 3 PHASE 220/480 VOLT MOTOR ALSO AVAILABLE: SAME AS ABOVE 7-1/2 H.P. 1 PHASE 220 VOLT MOTOR Location:  MN  
  • STANDARD EQUIPMENT: 9" PUNCH THROAT, MANUAL PUNCH ALIGNER, 4 WAY-24" LOW RAKE FLAT BAR SHEAR BLADES, ELECTRIC FOOT CONTROL, 2-1/4" STRIPPER, - L, 150 & 500 SERIES PUNCH & DIE ADAPTOR KIT THAT ACCEPTS UP TO 2-1/4" DIA PUNCHING VARIABLE ELECTRIC STROKE CONTROL, FLAT BAR SHEAR TABLE, GREASE BANK, PRICE DOES NOT INCLUDE ANGLE SHEAR BLADES Also Available:  7-1/2 H.P. 1 PHASE 220 VOLT MOTOR