-
Year: 1981 Model: 160-12 Equipped with: 30” Front operated manual backgauge Single, run, jog mode Speed adjustment Rear safety barrier Light curtains Portable foot pedal Large assortment of tooling Full length t-slot in bed Drilled and tapped holes in bed and ram
-
Model No.: HJ-1100 EQUIPPED WITH: Currently equipped with a Mimik Hydraulic Tracer on the compound. This may chase the compound travel. We have the original compound and can change out if customer does not need the tracer. The tracer will require its own 3 phase, 220 volts power supply to work in addition to 220 volts for the lathe.
-
Machine Model No.: 15C Regal Servo Shift New Date: 1988 EQUIPPED WITH: 12" Pratt Burnerd 4 Jaw Chuck with 1 Piece Hard Reversible Jaws Hardened and Ground Replaceable Bed Ways in Good Condition Micrometer Carriage Stop Thread Chasing Dial Inch / Metric Quick Change Gear Box (5) Assorted End Quadrant Gears, 48, 55, 56, 63, 64 + 1 Idler Gear Taper Attachment Inch / Metric Graduated Dials on Cross Slide and Top Compound 2 Axis Acu-Rite III Digital Readout (1) 9-1/2" Capacity Steady Rest with Solid Bronze Tips (1) 7" Capacity Steady Rest with Roller Bearing Supports (1) 4" Capacity Steady Rest with Solid Bronze Tips (1) Follower Rest (7) Leveling Screws (3) Extra Bronze Tip Steady Rest Supports (3) Extra Roller Type Steady Rest Supports (1) 14-1/2" Face Plate (1) 8" Diameter Drive Plate
-
Year: 1971 Model: 1812 Includes: 36" Power Operated Back Gauge Squaring Arm (3) Front Support Arm Electric Foot Switch 6" Slot in floor (Pit) required Excellent Condition Note - This machine was manufactured with a reduce rake angle to minimize distortion for narrow strips of thin material
-
Year: 1997 Model: Hydracrop 80A Includes 40" Electric Length Gauge Set of Solid Round/ Square Shear Blades Gauge Tables
-
New (Approx.): 1974 INCLUDES: Stacking Conveyor 36" Front Operated Back Gauge 9 38" Magnetic Sheet Supports Foot Switch Operation Squaring Arm 2 Sheet Supports.
-
Year 2000 EQUIPPED WITH: FADAL MULTI PROCESSOR CNC CONTROL 422K MEMORY HIGH TORQUE MOTOR 10,000 RPM SPINDLE COOLANT SYSTEM SUB-PLATE ON T-SLOT TABLE
-
Year 1999 EQUIPPED WITH: FADAL 88HS CNC CONTROL EXTENDED Z-AXIS 4TH AXIS DRIVE AND WIRING FADAL VH-65 ROTARY TABLE COOLANT SYSTEM HIGH TORQUE 384K MEMORY RIGID TAPPING HIGH SPEED CPU GRAPHICS TLC (TOOL LOAD COMPENSATION)
-
MFG: 1998 MODEL MV65B/50
-
MFG: 1999 MODEL SV-45
-
MFG: 2008 MODEL TPX6113/2
-
MFG: 2001 MODEL QUICK TURN NEXUS 350-II EQUIPPED WITH: MAZATROL FUSION 640MT CONTROL 10" 3-JAW CHUCK CHIP CONVEYOR
-
MFG: 1991 MODEL 6509
-
MFG: 2002 EQUIPPED WITH: OPERATORS STAND WITH PALM BUTTONS FOOT PEDAL MANUAL SET BACK STOP DIE RAIL FRONT MATERIAL SUPPORT ARMS MISCELLEANOUS TOOLING
-
Manufactured Year: 1986 NC9EX CONTROL CAPACITY................................ 110 TONS OVERALL BENDING LENGTH.................. 122" DISTANCE BETWEEN END FRAMES............. 100"
-
MFG: 1984 MODEL ACCUGAR-124N CAPACITY..... 12" X 24"
-
MFG: 1999 MODEL PRDC-150-3100 CAPACITY...165 TONS
-
MODEL 24-36 CHUCK.......... 40" CHUCK LIFE..... 3/4"
-
MFG: 1985 MODEL 35-72 CAPACITY... 35 TONS BED... 72"
-
MFG: 1971 MODEL 6510 CAPACITY: 65 TONS X 12' OVERALL: 12' X 12 GA
-
MFG: 1967 MODEL 1225 CAPACITY: .25" THICKNESS, MILD STEEL
-
MODEL 1052 RKB CAPACITY: 12 GA. 52" WIDTH
-
MODEL PHS-10 CAPACITY 2,000 LBS. FEATURES: SPENCER BLOWER
-
MODEL SPTX.5-100-200-24-5F 200 KVA
-
VOLTAGE: 230/460 VOLTS (CURRENTLY 480 VOLTS) MOTOR: 30 HP
-
Model: S2550/3 Includes - Front Manual Back Gauge with Linear Scale (3) Front Support Arms
-
Model 1006-R Includes: 36" Power Operated Back Gauge Foot Treadle 6 Ft. Squaring Arm Excellent Condition
-
Model 1406-R Includes: 36" Power Operated Back Gauge 6 ft. Squaring Arm (2) Front Support Arms
-
Model 1072 Max Gauge: 10 Length of Blade: 72 inches Hyd/Mech: mechanical Back Gauge: 24 inches
-
Mazak Mazatrol CNC Year 2004 25 HP Spindle 30 Position Side Arm ATC 1,417 IPM Rapids Chip Auger Chip Conveyor Tool Presetter.
-
Mazak Mazatrol CNC Year 2007 25 HP Spindle 30 Position Side Arm ATC 1,417 IPM Rapids Chip Auger Chip Conveyor Tool Presetter.
-
Mazak Mazatrol CNC Model VCN 510C-ii Year 2010 25 HP Spindle 30 Position Side Arm ATC 1,417 IPM Rapids Chip Auger Chip Conveyor Tool Presetter.
-
Model 818 Serial # 70074 Capacity (ga.) 18 Over all length 8 feet
-
-
-
-
*** 200' OF RUNWAY AVAILABLE AT EXTRA COST ***
-
NEW .................... 03/24/04 HOURS .................. 620 MODEL .................. Z-34/22N
-
Series No. 612
-
Model - HDS Year - 1995
-
Year 1986 MODEL #: 300 G 16
-
MODEL: J225-14 VERY GOOD CONDITION
-
NEW 1999 MODEL: CBII 230-12
-
Brand: TRACKMOBILE Model: 4300 TM Year: 1993
-
Brand: TRACKMOBILE Model: 4000 TM Year: 1990
-
Brand: CINCINNATI BICKFORD Model: 953-64 CHIP MASTER Year: 1965
-
Brand: CARLTON Model: 1A
-
Model: RE-1224 Brand: OOYA
-
AGE: 2000 MODEL NUMBER: 3400 RTC-60 EQUIPPED WITH: Automatic Removal Ramp for Part Sizes up to 24" x 60" Rolling Finished Part Bin Rolling Slug Bin Left & Right Hand Light Curtains Fanuc 180i-P CNC Control Automatic Repositioning for Sheets 10' to 12' Long 9-Station Tool Changer Hypertherm HT2000LHF 200 Amp High Frequency Plasma Cutting System System Dust Collection System, Cartridge Type, w/Pulse Cleaning Large Quantity of Tooling Complete Set of Original Manuals
-
MODEL NUMBER: A125U EQUIPPED WITH: Power Elevation Power Clamp on Column Power Rapid Traverse on Head Universal Head, Any Angle / Any Plate: Swivels 360 Degrees Tilts 90 Degrees Pendant Control Lifting Hook for Portability Travel Columns Runways MOTOR DATA: 7.5 HP
-
MODEL NUMBER: VRM 50 EQUIPPED WITH: Power Elevation Arm Traverse
-
Series E2 HeviStamper Eccentric Shaft Straight Side Press Year: 1966 Serial #: E2-200-16188 MODEL: No. E2-200
-
Year: 2015 Live Tool Sub Spindle Lathe Equipped With: Mitsubishi M730M CNC Control 10"Chuck Main/ 8" Chuck Sub Parts Catcher Tool Setter Sub Spindle Live Tool Capable Chip Conveyor All Available Manuals
-
Year 2008 EQUIPPED WITH: CENTURION 7 CNC CONTROL 12″ MANUAL 3-JAW CHUCK (2) POSITION QUICK-CHANGE TOOL POST GAP BED DESIGN TAILSTOCK MANUAL TAILSTOCK MANUAL/ELECTRONIC HANDWHEELS GAP DISTANCE 12.75″ BED LENGTH 40″
-
YEAR 2003 EQUIPPED WITH: CENTURION 6T CNC CONTROL 7″ COLOR LCD CNC, TEACH & MANUAL MODES OF OPERATION 8″ AUTO STRONG N208 HYDRAULIC CHUCK (12) POSITION AUTOMATIC TURRET MANUAL TAILSTOCK MANUAL/ELECTRIC HANDWHEELS
-
NEW 2002 MODEL 1810G Machine is equipped with: - CNC Front & Rear Gauging (120" & 48") - 10' Power Squaring Arm - Power Front Support Arm - Cincinnati 2CV10 Powered Rear Conveyor System w/ Material Supports - Automatic Lube System - (2) Extra Sets of Blades
-
Model: DCM 20/30 Year: 2005 Equipped with: 6 Degree canted head Power mitering head Power blade brush Mist lubrication Top clamp Laser light Movable control console
-
Year: 2005 Equipped with: Programmable hydraulic mitering head to 30 degrees PLC 500 control for manual or automatic operation Programs up to 99 jobs with piece length and angle, piece counter and angle display with up to 5 jobs in the queue Full capacity overhead bundling Variable vise pressure Remote console Positive hydraulic downfeed Powered blade chip brush Chip auger (3) sections totaling 30’ of powered conveyor 10’ non - powered roller conveyor $49,500 with the 30’ of powered conveyor and 10’ of free rolling conveyor $39,500 without the conveyor
-
Model: HKB 6050 CNC Year: 2002 Equipped With: Twin Post Design with Kanted Head Amada CNC Control Full Capacity Bundle Vise with Clamps on Both Sides and Top Rear Indexing Vise 78" Single Stroke Indexing Front Pulling Vise 22" Single Stroke. Hydraulic Blade Tensioning Chip Conveyor Coolant
-
Model: HBA 520 AU Year: 1997 Equipped with: Canted head Variable vise pressure Powered chip conveyor Out of stock switch Guide arm automatically adjusts with vise Piece counter Head height setting Flood coolant Powered blade chip brush
-
New 1989 Model: H-16 EQUIPPED WITH: Parts Wash Off Hose Machine Operation, Parts and Maintenance Manual Pull Out Chip Catch Pan Dual Work Lights NO Chip Auger 10 HP Blade Drive Motor ( New motor installed 11-14-2014) 3 HP Hydraulic System Motor Machine Wired for 230/460 Volt Operation Presently Wired for 220 Volts
-
MODEL .................... TSF-808S YEAR ..................... 1995 DIGITAL CONTROLLER: MODEL.................... PCXII 3-AXIS NC
-
Model: 175CB X 12 Year: 1994 Equipped with: Hurco Autobend 7 single axis CNC control (store up to 600 jobs / 2,400 bends, Tool library, Simple job mode for quick bends) Tonnage control. Manual ram tilt. (3) 24" front sheet support arms. Inch, single, and automatic mode. Manual R axis. Palm buttons mounted on ram. 3 speed ram Full length die holder. Portable foot pedal. Machine requires a 5" deep slot in the floor
-
Model: 160-12 Year: 1981 Equipped with: 30” Front operated manual backgauge Single, run, jog mode Speed adjustment Rear safety barrier Light curtains Portable foot pedal Large assortment of tooling Full length t-slot in bed Drilled and tapped holes in bed and ram
-
Model: 713012 Year: 1995 Equipped with: 2-axis Automec CNC 99 backgauge control ETS 100 portable pedestal with palm buttons Tonnage control Light curtains Drilled and Tapped holes in bed 3 T-slots front to back in bed Full length die holder
-
MODEL: MC50 RLS 2" MIIC CNC TUBE BENDER 2" MAXIMUM O.D. TUBE CAPACITY 3 AXIS GOOD CONDITION
-
YEAR: 1998 MODEL #: SMS 200 LH PROGRAMMABLE CONTROL A BEND CONTROLLER GOOD CONDITION
-
MODEL #: GHOE-630 36" FRONT OPERATED BACK GAUGE 13 HOLD DOWN ARMS SHADOW LIGHTING 43" SQUARING ARM FOOT PEDAL GOOD CONDITION
-
MODEL #: M-2560 11 HOLD DOWNS 39.8' SQUARING ARM 2 FRONT ARM SUPPORTS 37" CNC 2 SPEED POWERED BACK GAUGE LIGHT BEAM SHEARING 3 PROBES IN BACK GAUGE FOR CONTACT SHEARING GOOD CONDITION
-
Model 1808G FOOT PEDAL GOOD CONDITION
-
Year 1979 Model US130 13 HOLD DOWNS 36" FRONT OPERATED POWER BACK GAUGE FOOT PEDAL
-
Year 1966 EQUIPPED WITH: 48" front operated power back gauge with pushbuttons for fine adjustment forward -rapid traverse forward - backward & readout Pushbuttons for start - stop Automatic oil lubrication (5) Spring counterbalances (6) dovetail slots in top of bed Dovetail slot in front of bed Electric Foot Pedal 20 HP motor 10’ Squaring Arm 3 Sets Of Spare Blades 16” Pit
-
MFG: 2000 MODEL 200 PF-II OPERATOR STAND ALLEN BRADLEY PANEL VIEW 550 CONTROL MOTOR: 40 HP
-
NEW 2000 84" x 84" STATIONARY TABLE WITH 24" CROSS SLIDE IN/OUT CONTROL: LEMOINE RETROFIT CONTROL EQUIPPED WITH: #50 TAPER ADDITIONAL MILLING SPINDLE MILLING SPINDLE HAS APPROX 10" OF Z TRAVEL IN/OUT STS DRILLING ATTACHMENT LIFT UP CHIP CONVEYOR COOLANT SYSTEM MANUALS ELECTRICS: 230 VOLT 3 PHASE ALL NEW YASKAWA SERVO DRIVE MOTORS HEIDENHAIN GLASS SCALE X-AXIS & Y-AXIS ABOVE GROUND COOLANT TANK WHIP GUIDES AND BUSHINGS CHIP CONVEYOR NOTE: TECHNIDRILL MADE IN CLEVELAND, OHIO The maximum Diameter: Ø2.000’’ The maximum stroke length: 96”. Secondary spindle, is a manual CAT50 with a special adapter made for holding Technidrill Tooling. Z travel: 10”