• Clausing 20” Drill Press Mechanical Vari-Speed Series 2272 20” Floor, 300-2000 RPM Mechanical Vari-SPD, 3MT, 1 Phase Voltage (115,220) Capacitor Start  - $5,145.00 EVS Series 2274EVS 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 230/3/60 and 220/1/60 Volt  - $ 5,635.00 2272EVS 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 115/1/60 Volt - $6,100.00 CNC Power Feed Series 2279CNC 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 230/3/60 and 220/1/60 Volt w/CNC Power Feed Unit -  $10,110.00 2281CNC 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 115/1/60 Volt w/CNC Power Feed Unit - $10,585.00 Optional Accessories 1897 Key Type Chuck (1898 required) -  $ 165.00 1898 Arbor for 1897  - $25.00 2215-1A-CNC CNC Dual Palm Button Cycle Start Single SPDL -  $995.00 2216 Head Lift Mechanism - $615.00 2293AMT 43” Column in Lieu of Standard 66” - $85.00 2349AMT 90” Column in Lieu of Standard 66” - $215.00 7044 Coolant System for Floor Drill - $480.00 2371MT Mag. Starter Motor 110v Start/Stop Buttons - $1,040.00 (not required if ordering EVS or CNC version) 2377/1MT 1 Speed, 1 Phase Reversing Drum Switch w/ 2371 - $1,385.00 (not required if ordering EVS or CNC version) 302 Start/Stop Foot Switch for Spindle includes 2371MT - $1,155.00 (2272 only) 303E E-Stop Switch (Mag Starter Option Required) - $375.00 (not required if ordering EVS or CNC versions) 7022 Magnetic Base Work Light - $110.00 20-LED 3 Watt 200 Lumen LED Work Light (head installed) - $110.00 Location:  MI
  • Clausing 20” Drill Press Mechanical Vari-Speed Series 2274 20” Floor, 300-2000 RPM Mechanical Vari-SPD, 3MT, 3 Phase Voltage (208,230,460) -  $5,145.00 2275 20” Floor, 200-1300 RPM Mechanical Vari-SPD, 3MT, 3 Phase Voltage (208,230,460) -  $5,145.00 2276 20” Floor, 150-2000 RPM 2 SPD Motor, Mech Vari-SPD 3MT, 230/3/60 - $5,395.00 2277 20” Floor, 150-2000 RPM 2 SPD Motor, Mech Vari-SPD 3MT, 460/3/60 - $5,395.00 EVS Series 2274EVS 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 230/3/60 and 220/1/60 Volt - $5,635.00 2274EVS4 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 460/3/60 Volt - $6,110.00 CNC Power Feed Series 2279CNC 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 230/3/60 and 220/1/60 Volt w/CNC Power Feed Unit - $10,110.00 2280CNC 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 460/3/60 Volt w/CNC Power Feed Unit - $10,585.00 Optional Accessories 1897 Key Type Chuck (1898 required) - $ 165.00 1898 Arbor for 1897 - $25.00 2215-1A-CNC CNC Dual Palm Button Cycle Start Single SPDL - $995.00 2216 Head Lift Mechanism - $615.00 2293AMT 43” Column in Lieu of Standard 66” - $85.00 2349AMT 90” Column in Lieu of Standard 66” - $215.00 7044 Coolant System for Floor Drill - $480.00 2371MT Mag. Starter Motor 110v Start/Stop Buttons - $1,040.00 (not required if ordering EVS or CNC Version) 2375MT 2 Speed Reversing Drum Switch and 2371MT (2276&77 only) - $1,270.00 2377MT Reversing Drum Switch and 2371MT (2274&75 only) - $1,300.00 302 Start/Stop Foot Switch for Spindle includes 2371MT - $1,155.00 (2274&75 only) 302R1 Start/Stop Foot Switch for Spindle, Rev Drum SW, includes 2377 (2274&75 only) - $1,585.00 302R2 Start/Stop Foot Switch for Spindle 2 Spd Drills Rev Drum SW, includes 2375MT (2276&77 only) - $1,585.00 303E E-Stop Switch (Mag Starter Option Required) - $375.00 (not required if ordering EVS or CNC Version) 7022 Magnetic Base Work Light - $110.00 20-LED 3 Watt 200 Lumen LED Work Light (head installed) - $110.00
  • 10" high speed non-ferrous saw. 3 HP TEFC, 3 PH 220/440V (please specify voltage) or 3 HP 1 PH 220V.
    • Capacities: 3.25″ diameter solid.
    • 3450 RPM at spindle.
    • 5/8″ spindle arbor.
    • Sealed ball bearings.
    • Manual switch.
    • V-belt driven.
    • Uses a high speed carbide tipped blade (not included).
    • Single quick release cam-lock vise.
    • OSHA safety clam shell blade guard.
  • MODEL KM10HS 10" high speed non-ferrous mitre saw. 3 HP TEFC, 3 PH 220/440V (please specify voltage) or 3 HP 1 PH 220V. Manual switch. Wt. 300 lbs. Dimensions L 25 x W 24 x H 17. LESS BLADE. FOB: MI
  • • S6MS – 6″ x 48″ belt, variable position, direct drive, 1 lever quick belt release !!! • Cast iron frame, Full OSHA safety guard, Heavy duty steel stand. • 3 HP motor 3450 RPM, 1 phase or 3 phase, manual switch, 3500 SFPM • Reversible platen 6 1/2″ x 14″ (S6M) • Cast iron work table 6″ x 10″ with 1/2″ x 1/8″ slot • Option: JIC controls • Shipping dimensions: L 18″ x W 28″ x H32″ • Single phase amp draws: 110V 24 amps and 220V 12 amps. • Three phase amp draws: 220V 8.4 amps and 440V 4.2 amps. • Shipping weight: 230 lbs
  • Model 818 Serial # 70074 Capacity (ga.) 18 Over all length 8 feet
  • MODEL S612-1 6" BELT/12"DISC COMBINATION SANDER • 3 HP, 1 PH, 220V only. TEFC motor with switch, enclosed stand; less dust collector. Wt. 380 lbs. MODEL S612-3 6" BELT/12"DISC COMBINATION SANDER • 3 HP, 3 PH, 220/440V, please specify. TEFC motor with switch, enclosed stand; less dust collector. Wt. 380 lbs.
  • Model: S460W 4″ x60″ belt, 3 hp 1 phase or 3 phase motor, Magnetic 24 volt switch. Heavy stand, pre set belt tension, one lever belt change 10 gal. pump and tank system Spindle RPM – 2800 Flood coolant – 10 gal tank, 1/3 hp pump, splash guards. Platen – 4″ x 17″, work table 4″ x 6″
  • MODEL S612V-1 6" BELT/12"DISC COMBINATION SANDER • 3 HP, 1 PH TEFC motor, 220V only, enclosed stand with built-in 100 CFM dust collector. Manual switch-overload protection. Wt. 500 lbs. MODEL S612V-3 6" BELT/12"DISC COMBINATION SANDER • Same as above, only 3 PH motor. 220 or 440V, please specify. Wt. 500 lbs.
  • Model: S460HV • 4″ x 60″ belt • 1 HP, 1 PH, or 3 PH • 4″ pulley, 3450 RPM, 3600 SFPM, Direct drive • Reversible platen 4″ x 17″ • Cast iron table 4″ x 6″ • Full OSHA guard, Easy tracking , Quick belt change ! • DCV-6 Vacuum base 400 CFM • Dimensions: L 18″ x W 26″ x H 60″, WT. 485 lbs. • Manual switch – please specify phase and voltage
  • MODEL HS1414 high-speed “straight-cut" non-ferrous saw. 5 HP, 3 PH 220 or 440 volt. Motor RPM 3450. Optional: 1,725 RPM motor. Wt. 250 lbs. Optional: 1,725 RPM motor. FOB: MI
  • MODEL S6MV • Multi-position, vertical thru horizontal ! 3 HP! Powerful ! • Removable and replaceable steel mesh filter. • Belt sander with heavy-duty enclosed stand and vacuum dust collector. • 6″ x 48″ belt ( same as S6MS). DCV-6 dust collector base, 400 cfm, panel fiter. • Quick one lever abrasive belt changing! • Reversible steel platen , 6″ x14″,cast iron frame
  • S272V 2 x 72 inch belt grinder & vacuum base The Kalamazoo Industries model S272V 2 x 72 inch belt grinder & vacuum base features 3” and 1-1/2” quick-change contact wheels, plus a platen that rotates 365-degrees. This enables utilization of a single machine for grinding, shaping, contouring, flat work, angles, snagging and roughing. The grinder is mounted on a Kalamazoo Industries heavy-duty DCV-6 dust collector base.
  • Model S660MV • Multi-position, vertical thru horizontal ! 3 HP! Powerful ! • Removable and replaceable steel mesh filter. • Belt sander with heavy-duty enclosed stand and vacuum dust collector. • 6″ x 60″ belt DCV-6 dust collector base, 400 cfm, panel fiter. • Quick one lever abrasive belt changing! • Reversible steel platen , 6″ x14″,cast iron frame
  • EQUIPPED WITH:
    • ROLLER BEARING TABLE
    • 6" X 18" OS WALKER FINE DIVISION PERMANENT MAGNETIC CHUCK
    • 1 HP/3/60/220/440 VOLTS SPINDLE MOTOR
    • DIRECT DRIVE SPINDLE
    • FULL CAST IRON BASE
      SHIPS FROM: NJ
  • EQUIPPED WITH:
    • Totally enclosed transmission
    • Built in flood coolant
    • (2) 5’ Roller Conveyors
    • Manual length stop
    • 2 speed motor
    SHIPS FROM: MI
  • Type: Roll Formers Model: 16 GA AG Brand: LOCKFORMER
  • • 6″ x 48″ Wet belt sander, 3 hp, 1 ph/220 or 3 ph/220/440 motor, Also available in 50 hz, 575 volt • Magnetic switch with 24 volt at pushbutton. • 3450 rpm motor w/ 2800 SFPM at belt. • Steel reverseable platen 6 1/2″ x 14″ • Multi-postion vertical thru horizontal, cast iron frame. • Cast Iron work table, 6″ x 10″ w/1/2″ x 1/8″ slot • 1 lever quick belt change, pre-set spring belt tension. • Full OSHA guard, heavy duty base • 1/4 hp coolant pump & 10 gal. tank w/ baffles.
  • Model - S660MW • 3 HP, 1 PH or 3 PH, 3450 RPM • 6″ x 60″ wet belt sander, vertical/ horizontal • Steel platen – 6-1/2″ x 17″, 3500 SFPM • Cast iron table with 1/2″ x 1/8″ slot, cast iron frame, Heavy duty base. • Quick belt release, Full safety guard. • Constant spring belt tension, FAST 1 lever belt change !! • Magnetic switch, 24 volts at control • Coolant pump and tank, 10 gal. 1/3 HP
  • MODEL KM14HS 14" high speed non-ferrous mitre saw. 5 HP TEFC, 3 PH 220/440V (please specify voltage) or 5 HP 1 PH 220V. Magnetic switch. Wt. 490 lbs. Dimensions L 26" x W 24" x H 50". LESS BLADE. FOB:  Michigan
  • 3.3 cubic ft. U shaped tub rotates media to polish, deburr, peen all types of material. Uses a wide variety of media such as ceramics, steel shot, plastics to achieve mirror finishes on aluminum, steel and most metals. Included coolant tank on the rear of the unit sprays a fine mist into the tub to lubricate the parts and the standard 1 hr. timer can be set for short or long runs without constant attention. The urethane lining lasts for years and can be replaced when needed at the factory.
  • EQUIPPED WITH:
    • 10 HP WHITNEY HYRAULIC POWER UNIT
    • PENDANT CONTROLS
    • 460V
    • NEW CONTROL VALVE
    • Foot Switch
      SHIPS FROM: AL