-
Clausing 20” Drill Press Mechanical Vari-Speed Series 2272 20” Floor, 300-2000 RPM Mechanical Vari-SPD, 3MT, 1 Phase Voltage (115,220) Capacitor Start - $5,145.00 EVS Series 2274EVS 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 230/3/60 and 220/1/60 Volt - $ 5,635.00 2272EVS 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 115/1/60 Volt - $6,100.00 CNC Power Feed Series 2279CNC 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 230/3/60 and 220/1/60 Volt w/CNC Power Feed Unit - $10,110.00 2281CNC 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 115/1/60 Volt w/CNC Power Feed Unit - $10,585.00 Optional Accessories 1897 Key Type Chuck (1898 required) - $ 165.00 1898 Arbor for 1897 - $25.00 2215-1A-CNC CNC Dual Palm Button Cycle Start Single SPDL - $995.00 2216 Head Lift Mechanism - $615.00 2293AMT 43” Column in Lieu of Standard 66” - $85.00 2349AMT 90” Column in Lieu of Standard 66” - $215.00 7044 Coolant System for Floor Drill - $480.00 2371MT Mag. Starter Motor 110v Start/Stop Buttons - $1,040.00 (not required if ordering EVS or CNC version) 2377/1MT 1 Speed, 1 Phase Reversing Drum Switch w/ 2371 - $1,385.00 (not required if ordering EVS or CNC version) 302 Start/Stop Foot Switch for Spindle includes 2371MT - $1,155.00 (2272 only) 303E E-Stop Switch (Mag Starter Option Required) - $375.00 (not required if ordering EVS or CNC versions) 7022 Magnetic Base Work Light - $110.00 20-LED 3 Watt 200 Lumen LED Work Light (head installed) - $110.00 Location: MI -
Clausing 20” Drill Press Mechanical Vari-Speed Series 2274 20” Floor, 300-2000 RPM Mechanical Vari-SPD, 3MT, 3 Phase Voltage (208,230,460) - $5,145.00 2275 20” Floor, 200-1300 RPM Mechanical Vari-SPD, 3MT, 3 Phase Voltage (208,230,460) - $5,145.00 2276 20” Floor, 150-2000 RPM 2 SPD Motor, Mech Vari-SPD 3MT, 230/3/60 - $5,395.00 2277 20” Floor, 150-2000 RPM 2 SPD Motor, Mech Vari-SPD 3MT, 460/3/60 - $5,395.00 EVS Series 2274EVS 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 230/3/60 and 220/1/60 Volt - $5,635.00 2274EVS4 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 460/3/60 Volt - $6,110.00 CNC Power Feed Series 2279CNC 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 230/3/60 and 220/1/60 Volt w/CNC Power Feed Unit - $10,110.00 2280CNC 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 460/3/60 Volt w/CNC Power Feed Unit - $10,585.00 Optional Accessories 1897 Key Type Chuck (1898 required) - $ 165.00 1898 Arbor for 1897 - $25.00 2215-1A-CNC CNC Dual Palm Button Cycle Start Single SPDL - $995.00 2216 Head Lift Mechanism - $615.00 2293AMT 43” Column in Lieu of Standard 66” - $85.00 2349AMT 90” Column in Lieu of Standard 66” - $215.00 7044 Coolant System for Floor Drill - $480.00 2371MT Mag. Starter Motor 110v Start/Stop Buttons - $1,040.00 (not required if ordering EVS or CNC Version) 2375MT 2 Speed Reversing Drum Switch and 2371MT (2276&77 only) - $1,270.00 2377MT Reversing Drum Switch and 2371MT (2274&75 only) - $1,300.00 302 Start/Stop Foot Switch for Spindle includes 2371MT - $1,155.00 (2274&75 only) 302R1 Start/Stop Foot Switch for Spindle, Rev Drum SW, includes 2377 (2274&75 only) - $1,585.00 302R2 Start/Stop Foot Switch for Spindle 2 Spd Drills Rev Drum SW, includes 2375MT (2276&77 only) - $1,585.00 303E E-Stop Switch (Mag Starter Option Required) - $375.00 (not required if ordering EVS or CNC Version) 7022 Magnetic Base Work Light - $110.00 20-LED 3 Watt 200 Lumen LED Work Light (head installed) - $110.00
-
10" high speed non-ferrous saw. 3 HP TEFC, 3 PH 220/440V (please specify voltage) or 3 HP 1 PH 220V.- Capacities: 3.25″ diameter solid.
- 3450 RPM at spindle.
- 5/8″ spindle arbor.
- Sealed ball bearings.
- Manual switch.
- V-belt driven.
- Uses a high speed carbide tipped blade (not included).
- Single quick release cam-lock vise.
- OSHA safety clam shell blade guard.
-
MODEL KM10HS 10" high speed non-ferrous mitre saw. 3 HP TEFC, 3 PH 220/440V (please specify voltage) or 3 HP 1 PH 220V. Manual switch. Wt. 300 lbs. Dimensions L 25 x W 24 x H 17. LESS BLADE. FOB: MI -
• S6MS – 6″ x 48″ belt, variable position, direct drive, 1 lever quick belt release !!! • Cast iron frame, Full OSHA safety guard, Heavy duty steel stand. • 3 HP motor 3450 RPM, 1 phase or 3 phase, manual switch, 3500 SFPM • Reversible platen 6 1/2″ x 14″ (S6M) • Cast iron work table 6″ x 10″ with 1/2″ x 1/8″ slot • Option: JIC controls • Shipping dimensions: L 18″ x W 28″ x H32″ • Single phase amp draws: 110V 24 amps and 220V 12 amps. • Three phase amp draws: 220V 8.4 amps and 440V 4.2 amps. • Shipping weight: 230 lbs -
Model 818 Serial # 70074 Capacity (ga.) 18 Over all length 8 feet -
MODEL S612-1 6" BELT/12"DISC COMBINATION SANDER • 3 HP, 1 PH, 220V only. TEFC motor with switch, enclosed stand; less dust collector. Wt. 380 lbs. MODEL S612-3 6" BELT/12"DISC COMBINATION SANDER • 3 HP, 3 PH, 220/440V, please specify. TEFC motor with switch, enclosed stand; less dust collector. Wt. 380 lbs. -
Model: S460W 4″ x60″ belt, 3 hp 1 phase or 3 phase motor, Magnetic 24 volt switch. Heavy stand, pre set belt tension, one lever belt change 10 gal. pump and tank system Spindle RPM – 2800 Flood coolant – 10 gal tank, 1/3 hp pump, splash guards. Platen – 4″ x 17″, work table 4″ x 6″ -
MODEL S612V-1 6" BELT/12"DISC COMBINATION SANDER • 3 HP, 1 PH TEFC motor, 220V only, enclosed stand with built-in 100 CFM dust collector. Manual switch-overload protection. Wt. 500 lbs. MODEL S612V-3 6" BELT/12"DISC COMBINATION SANDER • Same as above, only 3 PH motor. 220 or 440V, please specify. Wt. 500 lbs.
-
Model: S460HV • 4″ x 60″ belt • 1 HP, 1 PH, or 3 PH • 4″ pulley, 3450 RPM, 3600 SFPM, Direct drive • Reversible platen 4″ x 17″ • Cast iron table 4″ x 6″ • Full OSHA guard, Easy tracking , Quick belt change ! • DCV-6 Vacuum base 400 CFM • Dimensions: L 18″ x W 26″ x H 60″, WT. 485 lbs. • Manual switch – please specify phase and voltage -
MODEL HS1414 high-speed “straight-cut" non-ferrous saw. 5 HP, 3 PH 220 or 440 volt. Motor RPM 3450. Optional: 1,725 RPM motor. Wt. 250 lbs. Optional: 1,725 RPM motor. FOB: MI -
MODEL S6MV • Multi-position, vertical thru horizontal ! 3 HP! Powerful ! • Removable and replaceable steel mesh filter. • Belt sander with heavy-duty enclosed stand and vacuum dust collector. • 6″ x 48″ belt ( same as S6MS). DCV-6 dust collector base, 400 cfm, panel fiter. • Quick one lever abrasive belt changing! • Reversible steel platen , 6″ x14″,cast iron frame -
S272V 2 x 72 inch belt grinder & vacuum base The Kalamazoo Industries model S272V 2 x 72 inch belt grinder & vacuum base features 3” and 1-1/2” quick-change contact wheels, plus a platen that rotates 365-degrees. This enables utilization of a single machine for grinding, shaping, contouring, flat work, angles, snagging and roughing. The grinder is mounted on a Kalamazoo Industries heavy-duty DCV-6 dust collector base. -
Model S660MV • Multi-position, vertical thru horizontal ! 3 HP! Powerful ! • Removable and replaceable steel mesh filter. • Belt sander with heavy-duty enclosed stand and vacuum dust collector. • 6″ x 60″ belt DCV-6 dust collector base, 400 cfm, panel fiter. • Quick one lever abrasive belt changing! • Reversible steel platen , 6″ x14″,cast iron frame
-
EQUIPPED WITH:- Totally enclosed transmission
- Built in flood coolant
- (2) 5’ Roller Conveyors
- Manual length stop
- 2 speed motor
-
-
• 6″ x 48″ Wet belt sander, 3 hp, 1 ph/220 or 3 ph/220/440 motor, Also available in 50 hz, 575 volt • Magnetic switch with 24 volt at pushbutton. • 3450 rpm motor w/ 2800 SFPM at belt. • Steel reverseable platen 6 1/2″ x 14″ • Multi-postion vertical thru horizontal, cast iron frame. • Cast Iron work table, 6″ x 10″ w/1/2″ x 1/8″ slot • 1 lever quick belt change, pre-set spring belt tension. • Full OSHA guard, heavy duty base • 1/4 hp coolant pump & 10 gal. tank w/ baffles. -
Model - S660MW • 3 HP, 1 PH or 3 PH, 3450 RPM • 6″ x 60″ wet belt sander, vertical/ horizontal • Steel platen – 6-1/2″ x 17″, 3500 SFPM • Cast iron table with 1/2″ x 1/8″ slot, cast iron frame, Heavy duty base. • Quick belt release, Full safety guard. • Constant spring belt tension, FAST 1 lever belt change !! • Magnetic switch, 24 volts at control • Coolant pump and tank, 10 gal. 1/3 HP -
MODEL KM14HS 14" high speed non-ferrous mitre saw. 5 HP TEFC, 3 PH 220/440V (please specify voltage) or 5 HP 1 PH 220V. Magnetic switch. Wt. 490 lbs. Dimensions L 26" x W 24" x H 50". LESS BLADE. FOB: Michigan -
3.3 cubic ft. U shaped tub rotates media to polish, deburr, peen all types of material. Uses a wide variety of media such as ceramics, steel shot, plastics to achieve mirror finishes on aluminum, steel and most metals. Included coolant tank on the rear of the unit sprays a fine mist into the tub to lubricate the parts and the standard 1 hr. timer can be set for short or long runs without constant attention. The urethane lining lasts for years and can be replaced when needed at the factory. -
EQUIPPED WITH:- 10 HP WHITNEY HYRAULIC POWER UNIT
- PENDANT CONTROLS
- 460V
- NEW CONTROL VALVE
- Foot Switch
-
-
SHIPS FROM: AR -
TOYOTA 427FG25 5000 LBS LIFT 80 MAX LIFT HEIGHT 58" LOWERED MAST HEIGHT 38" FORK TINES LP GAS UNIT RUNS AND OPERATES WELL Hours: 27500 -
EQUIPPED WITH:- "New" Fine-Division" Permanent Magnetic Chuck
- Hand Feeds - Manual operation model
- All castings are tempered and stress relieved twice to assure stability of the machine structure and resist deflection under load
- Hardened and ground column ways with cast spindle slide is precision fit for no "hang-up" gravity downfeed
- 3 HP V3 Grade spindle motor for powerful output to achieve precision
- Cartridge spindle with four preloaded class 7 P4 bearings and run-out
- The table traverses on linear ball bearings with hardened and ground guide ways to ensure a smooth and easy movement of the table
- Double V cross ways are hand scraped and Turcite coated for greater flatness and high wear resistance
- Indexable table handwheel for ease of operation
- Vertical handwheel at the waist level
- The automatic lubrication system continuously floods saddle and column ways, bearings, and leadscrews for better machine performance and less maintenance
- Wheelhead variable spindle speeds as options
- 0.000050” Micro downfeed and micro crossfeed as options
- Voltage requires 220V/440V/3 Phase/60 Hz., prewired 220V
-
TOYOTA 427FGCU25 5000 LBS CAP 80" MAX HEIGHT 58" LOWERED MAST HEIGHT 38" FORKS, LP GAS, UNIT RUNS AND OPERATES WELL -
AUTOMATIC TABLE FEED AND STOP CENTERING VEE TOOLING BIJUR ONE-SHOT LUBRICATION SYSTEM Overall Size, Approximate: 32"(LR) X 42"(FB) X 51"(H) Weight, Approximate: 1200 Lbs. Location: TN -
Model: RE-1224 Brand: OOYA -
Brand: CARLTON Model: 1A -
Kalamazoo Industries S8HD 8 x 60 inch horizontal belt sander that’s designed for quick heavy duty clean up work on various ferrous and non-ferrous materials. Features air belt tension (air requirements 40 to 50 PSI), 7.5HP motor, easy belt tracking, reversible platen, simple part replacement and 28″ x 10″ work surface. -
The Kalamazoo Industries S8W 8 x 60 Inch wet vertical belt sander features a platen work surface of 8″ W x 13″ H and adjustable work table with a work surface of 8″ x 12″ D, 7.5Hp 3PH TEFC motor, air belt tension that requires 40 to 50 PSI, pump and tank system. -
EQUIPPED WITH:- 6" x 18" Magnetic Chuck
- Coolant System
- Lamp Attachment
-
Model: S2550/3 Includes - Front Manual Back Gauge with Linear Scale (3) Front Support Arms -
MFG: 1991 MODEL 6509 -
~Additional state sales tax may apply~ Item Number BSV-20VS 2 hp motor runs on 220-volt single-phase power. Wide 20.5" throat depth. 12.375” maximum cutting thickness. Accepts standard .25” to .75” blades. Cast iron table can pivot front to back and left to right. Includes a cast iron mitering system, rip fence, and protractor to make sure your cuts are straight and repeatable. Variable speed from 65 to 1640 fpm allows you to adjust the speed for cutting wood, metal, and even plastic. Change the speed with the hand wheel (just turn right for higher speed, left for lower). Digital readout lets you see the exact blade speed, so you can choose the right settings for your material and extend blade life. This band saw includes everything you need to cut out the center of the material without having to fix a cut through it. Manual shear lets you cut the blade, so you can run it through the workpiece, then weld it back together. Comes standard with a fully-integrated blade welder with a built-in grinder for finishing the weld joint—great for getting to the center of a cut or repairing blades. Thick steel plate framework minimizes vibrations to deliver accurate cuts and helps the machine last for many years. Air blowdown system cools the blade and keeps the saw clean from material chips and shavings. Halogen work light lets you see what you’re cutting more clearly. -
Resistance Spot Welder Heavy duty resistance rocker arm spot welder -
75 KVA Sciaky Spot Welder 3-Phase Heavy duty industrial spot welder -
75 KVA Taylor Winfield Resistance Seam Welder • Model #LSC-30-UGD • 75 KVA output -
MODEL HSM14 FOR CUTTING ALUMINUM AND OTHER NON-FERROUS MATERIAL WITH STEEL BLADE. 14" high speed mitre. 5HP TEFC, 3PH motor with magnetic starter, 3450 RPM. Please specify voltage. For non-ferrous only. Wt.750 lbs. Optional: 1,725 RPM motor. FOB: MI -
Yr: 1964 Equipped With: - 24" Rear Operated Manual Back Gauge - 4' Squaring Arm - Full Length Foot Treadle -
MODEL SPTX.5-100-200-24-5F 200 KVA -
EQUIPPED WITH:- 6" X 18" FINE-DIVISION PERMANENT MAGNETIC CHUCK
-
EQUIPPED WITH:- "SOKKI" DIGITAL READOUT DISPLAY FOR THE VERTICAL AXIS, CROSS AXIS SCALE NEEDS REPAIR
- OPTIONAL FINE FEED KNOBS, FOR BOTH CROSS & VERTICAL AXES
- ROLLER BEARING TABLE W/ADJUSTABLE TENSION
- LOCKING MECHANISM FOR THE CROSS-SLIDE
- "BIJUR" ONE-SHOT LUBRICATOR
- 6" X 18" "O.S. WALKER" "CERAMAX" FINE-DIVISION PERMANENT
- WORK LIGHT
- 1 HP 3/60/220-440 VOLT "POPE" "SUPER-PRECISION" DIRECT DRIVE SPINDLE
- MACHINE IS PRESENTLY WIRED FOR 460 VOLTS
-
EQUIPPED WITH:- Double acting work head
- 44” between uprights
- 8-1/4” width between table channels
- (2) forged steel V-blocks
- Flat ram nose
- Pressure gauge
- Manual cable lift with locking pins
- Variable speed ram
- 10 quart oil capacity
-
Brand: CINCINNATI BICKFORD Model: 953-64 CHIP MASTER Year: 1965 -
The BG14 backstand grinder is a powerful 10HP 3PH unit with a 70 duro 14″ x 3″ contact wheel. This unit has easy setup, easy backstand tracking, easy clean out, vacuum attachment, magnetic switch, parts table, replaceable parts and isolation pads. The BG14 is great for steel foundries, aggressive grinding, descaling, deburring, and finishing. Location: MI -
Equipped With: 12" 3-Jaw Chuck Coolant System Tailstock Hardened and Ground Ways Inch and Metric Threading Location: TX -
EQUIPPED WITH:- BACK GAUGE
- FRONT OPERATED
- FOOT PEDAL
- CONTROLS MOUNTED
- SQUARING ARM
- 5 HP 1655 RPM 220/440 VOLT 3 PHASE
- 14.4/6.8 ZMP MOTOR
-
EQUIPPED WITH:- Frame
- Cylinder
- Two Forged Steel Table Plates
- Pressure Guage
- Lifting Chain
- Controls-On/Off switch with Joystick Hydraulic Control
- Hydraulic Pump-Combination Power Unit
- Oil Capacity- Approx 3 Gallons (US)
-
EQUIPPED WITH:- 2-Axis DRO
- Steady Rest
- Taper Attachment
- 8" 3-Jaw Chuck
-
EQUIPPED WITH:- Hyd-Mech Sequencer Control w/Blade Speed,
- Readout & Parts Counter
- Flood Coolant w/Wash Down Hose
- Mitering to 30 Degrees in One Direction
- Replaceable Carbide Guide Inserts
- Variable Hydraulic Down Feed Force
- Variable Hydraulic Down Feed Force
- Powered Blade Chip Brush
- Manual Length Stop
-
SHIPS FROM: OH -
EQUIPPED WITH:- 10” 3 JAW CHUCK
- 10” 4 JAW CHUCK
- 15” FACE PLATE
-
Model Hydracrop 50SD Includes: Gauge Tables- Punch and Coper Notcher Station Electric Foot Switches Location: NY -
EQUIPPED WITH: BELMONT EQUIPMENT CO. "AUTO Z" CONTROL "CDH-3A" CNC Z-AXIS CONTROL WITH DIGITAL DISPLAY & INDEPENDENT METERS (AMPS) PROGRAMMABLE "SERVO" MOTOR FOR LONGITUDINAL & CROSS AXES MOVEMENTS. THE MACHINE WAS CONNECTED TO A PC FOR DOWNLOADING PROGRAMS. MITUTOYO 2-AXIS DIGITAL READOUT FOR THE TABLE MOVEMENTS HIGH PRECISION BALL SCREWS FOR AXES MOVEMENTS ASTEC WATER PUMP "EBBCO" FILTRATION SYSTEM WORK LIGHT MACHINE IS PRESENTLY WIRED FOR 3/60/220 VOLTS LOCATION: NJ -
Model 1072 Max Gauge: 10 Length of Blade: 72 inches Hyd/Mech: mechanical Back Gauge: 24 inches -
MFG: 1967 MODEL 1225 CAPACITY: .25" THICKNESS, MILD STEEL -
EQUIPPED WITH:- 4- Jaw Chuck
- Steady Rest
- Inch/Metric Threading
- Toolpost
- Chip Pans
-
EQUIPPED WITH: - ACU-RITE THREE AXIS DIGITAL READOUT FOR THE QUILL, LONGITUDINAL & CROSS TABLE TRAVEL - BRIDGEPORT POWER FEED FOR LONGITUDINAL TABLE TRAVEL - BRIDGEPORT POWER FEED FOR CROSS TABLE TRAVEL - SERVO POWER FEED FOR VERTICAL KNEE TRAVEL - CHROME WAYS - BIJUR ONE SHOT LUBE - BRIDGEPORT SERIES I VARIABLE SPEED MILLING HEAD - 2/3 HORSE POWER 60 CYCLE 208/230/460 VOLT, 3 PHASE MOTOR -
-
~Additional state sales tax may apply~ Model #BSV-24 Accepts most standard blade widths from .25” to .75”. Offers 4 speeds, ranging from 80 to 318 fpm. Robust 2 hp motor runs on 220-volt single-phase power. Reliable gear-driven transmission saves you from having to replace broken belts or pulleys. Uses tungsten carbide blade guides as well as fully sealed ball bearings for smoothness and durability. Our adjustable blade guide design allows you to get as close as possible to the material for accuracy. We designed this vertical metal cutting band saw to let you cut out the center of the material without having to cut through it. Includes a blade welding station, complete with a shear and grinding wheel, for getting to the middle of a cut or repairing broken blades. Front panels give you easy access for blade alignment. 24” x 22” milled cast iron table pivots 10° front to back and 15° left to right for chamfer cuts. Electro-welded steel plate construction keeps the machine stable, minimizes vibrations, and maintains accuracy. Bright halogen work light helps you see exactly where the cut is. Location: WI -
-
Model No.: HJ-1100 EQUIPPED WITH: Currently equipped with a Mimik Hydraulic Tracer on the compound. This may chase the compound travel. We have the original compound and can change out if customer does not need the tracer. The tracer will require its own 3 phase, 220 volts power supply to work in addition to 220 volts for the lathe. -
EQUIPPED WITH: FRONT OPERATED POWER BACK GAUGE FRONT SUPPORT ARM SQUARING ARM FOOT PEDAL Location: NJ -
EQUIPPED WITH: Mitutoyo 2 Axis Digital Readout System, Model KA12 Counter 10" 3 Jaw Chuck with 2 Piece Jaws with Hard Reversible Top Jaws, 2" Thru Hole & D6 Mount Aloris Quick Change Tool Post with (11) Assorted Tool Holders (1) Live Center #4 Morse Taper (5) Adjustable Carriage Feed Kick Out Stops Swing Up Plexiglass Chuck Guard Spindle Jog Coolant On – Off Coolant System Built Into Base of Machine One Shot Carriage & Way Lubrication System Thread Chasing Dial Cross Slide and Compound Dials are Graduated in Inch & Metric 10-1/2" Steady Rest with Roller Supports Hardened Ground Bed Ways in Very Good Condition OEM Service Manual Complete Set of End Quadrant Change Gears Full Length Foot Treadle Spindle Brake Full Length Rear Splash Guard Main Drive Motor: 7-1/2 HP Coolant Pump Motor: 1/8 HP -
-
EQUIPPED WITH:- Accurite Digital Readouts
- 16" 4 Jaw Chuck
- Steady Rest
- Tail Stock
- 10" 3 jaw chuck, 12" 4 jaw chuck
-
EQUIPPED WITH:- Twin Post Design
- multiple stroke
- stepless VARI-drive
- stepless adjustable saw blade pressure via hydraulic valve
- piece counter with piece qty. pre
- selection
- automatic sequence
- coolant pump
- forward and reverse feed operations
-
EQUIPPED WITH:- Designed for longitudinal and cross cutting of steel sections, plates and billets in straight cuts.
- Machine capacities are: cutting height: 12", cutting length: 39".
- Machine stand of solid steel construction.
- Planed machine table of high tensile strength steel.
- Cutting head unit adjustable dovetail guides.
- Gear box with large helical hardened gears.
- For segmental circular cold saw blade of 760mm (30") and 910mm (36") diameter.
- Fixture for chip remover.
- Adjustable blade stabilizer.
- Centralized lubrication system for guide tracks of cutting head carriage.
- Two-speed drive motor 6.1/7.5 HP, 1800/3600 RPM, with Vee-belt step pulley for 4 saw blade periphery speeds 52/104 and 72/144 ft/min.
- Electrics upgraded to push buttons with contactors.
- Complete hydraulic system. Hydraulic motor, 4 HP, 1500 RPM, pump, pressure gauge and thermo-magnetic motor protection switch.
- Complete coolant system with 0.2 HP motor and pump.
- Manual control valves for saw feed and vertical and horizontal clamping.
- Two vertical clamping cylinders with 12" stroke, adjustable longitudinally and one horizontal clamping cylinder with 1½" stroke adjustable laterally.
- All hydraulic and electrical installations are easily accessible.
- Built-in tool and electrical cabinets.
- Machine finish - gray.
- Powered mitre turntable.
-
SHIPS FROM: TX -
Make: Toyota Model: 8FGU25 Year: 2013 Mast: 83/189” Tire: Pneumatic Capacity: 5000 Forks: 42” Meter Hours: 10500 Fuel: LP Attachment: Side shifter -
Make: Toyota Model: 8FGU25 Year: 2013 Mast: 83/189” Tire: Pneumatic Capacity: 5000 Forks: 42” Meter Hours: 11400 Fuel: LP Attachment: Side shifter -
MODEL S100XL2 MAXIMUM CAPACITY: 8,500 LBS. 84/162" TRIPLE STAGE MAST 3 WAY LPG CUSHION TIRES 6062 HOURS -
Model 1406-R Includes: 36" Power Operated Back Gauge 6 ft. Squaring Arm (2) Front Support Arms -
MFG: 1984 MODEL ACCUGAR-124N CAPACITY..... 12" X 24"
