• EQUIPPED WITH: BELMONT EQUIPMENT CO. "AUTO Z" CONTROL "CDH-3A" CNC Z-AXIS CONTROL WITH DIGITAL DISPLAY & INDEPENDENT METERS (AMPS) PROGRAMMABLE "SERVO" MOTOR FOR LONGITUDINAL & CROSS AXES MOVEMENTS. THE MACHINE WAS CONNECTED TO A PC FOR DOWNLOADING PROGRAMS. MITUTOYO 2-AXIS DIGITAL READOUT FOR THE TABLE MOVEMENTS HIGH PRECISION BALL SCREWS FOR AXES MOVEMENTS ASTEC WATER PUMP "EBBCO" FILTRATION SYSTEM WORK LIGHT MACHINE IS PRESENTLY WIRED FOR 3/60/220 VOLTS LOCATION:  NJ
  • EQUIPPED WITH: Machine Control: Fanuc 21-GA Incremental Downfeed, Servo Driven Rough, Fine and Sparkout Feeds Programmable Dress Cycles with Wheel Compensation Automatic Overhead Wheel Dresser Coolant System with 20" Wide Paper Media and 10" Wide Magnetic Drum and Sludge Catch Pan Static Type Wheel Balancing Unit (2) 10-1/2" Long Wheel Balancing Arbors (2) Wheel Grinding Hubs (16) Steel Leveling Screw Pads Tool Box with Assorted Wrenches and Miscellaneous OEM Operators Manual with Foundation Print and Schematics OEM Parts Manual Built-In Input Power Transformer to Convert 3 Phase, 60 Hz, 230/480 Volt Input to 200Volt Machine Requirement Test Run on and Presently Wired for 480 Volts Input OVERALL SIZE OF COMPONENTS: Machine with Chuck: 149" LR x 126" FB x 98" High on 4" Blocks x 17,200 Lbs. Coolant System: 64" x 55" x 29" High x Estimated 700 Lbs. Wheel Dress in Box: 19" x 27" x 21" High x Estimated 150 Lbs. Location:  PA
  • STANDARD EQUIPMENT: 9" PUNCH THROAT, MANUAL PUNCH ALIGNER, 4 WAY-24" LOW RAKE FLAT BAR SHEAR BLADES, ELECTRIC FOOT CONTROL, 2-1/4" STRIPPER, - L, 150 & 500 SERIES PUNCH & DIE ADAPTOR KIT THAT ACCEPTS UP TO 2-1/4" DIA PUNCHING VARIABLE ELECTRIC STROKE CONTROL, FLAT BAR SHEAR TABLE, GREASE BANK, PRICE DOES NOT INCLUDE ANGLE SHEAR BLADES Also Available:  7-1/2 H.P. 1 PHASE 220 VOLT MOTOR
  • STANDARD EQUIPMENT INCLUDES: 9" PUNCH THROAT,MANUAL PUNCH ALIGNER, 4 WAY-24" LOW RAKE FLAT BAR SHEAR BLADES, ELECTRIC FOOT CONTROL, 2-1/4" STRIPPER, - L, 150 & 500 SERIES PUNCH & DIE ADAPTOR KIT THAT ACCEPTS UP TO 2-1/4" DIA PUNCHING VARIABLE ELECTRIC STROKE CONTROL, FLAT BAR SHEAR TABLE, GREASE BANK,PRICE DOES NOT INCLUDE ANGLE SHEAR BLADES 7-1/2 H.P. 3 PHASE 220/480 VOLT MOTOR ALSO AVAILABLE: SAME AS ABOVE 7-1/2 H.P. 1 PHASE 220 VOLT MOTOR Location:  MN  
  • STANDARD EQUIPMENT INCLUDES: 9" PUNCH THROAT, MANUAL PUNCH ALIGNER, 4 WAY-24" LOW RAKE FLAT BAR SHEAR BLADES, ELECTRIC FOOT CONTROL, 2-1/4" STRIPPER, - L, 150 & 500 SERIES PUNCH & DIE ADAPTOR KIT THAT ACCEPTS UP TO 2-1/4" DIA PUNCHING VARIABLE ELECTRIC STROKE CONTROL, FLAT BAR SHEAR TABLE, GREASE BANK, CHOICE OF NOTCHER IN 4TH STATION; OF A PIPE, SQUARE OR V COPER NOTCHER PRICE DOES NOT INCLUDE ANGLE SHEAR BLADES 7-1/2 H.P. 3 PHASE 220/480 VOLT MOTOR ALSO AVAILABLE: SAME AS ABOVE, 7-1/2 H.P., 1 PHASE, 220 VOLT MOTOR Location:  MN
  • Model Hydracrop 50SD Includes: Gauge Tables- Punch and Coper Notcher Station Electric Foot Switches Location:  NY
  • Equipped With: S2 SERIES 2-POINT STRAIGHT SIDE PRESSThe Stamtec S2 two-point straight side press (a.k.a. double crank press) is designed for stamping large parts or ones that require a large bed area to accommodate progressive or transfer dies. Oftentimes, these types of operations require high tonnage, high flywheel energy, maximum frame or bed rigidity, or some combination thereof. The path of the slide is guided by eight full-length, ninety-degree gibs with nickel-bronze wear plates, offering maximum control, a high degree of accuracy and ease of adjustment. Location:  OH
  • EQUIPPED WITH: - FRONT OPERATED POWER BACK GAUGE WITH FINE WHEEL ADJUSTMENT - FOOT PEDAL - BIJUR LUBRICATION SYSTEM Location:  NJ
  • EQUIPPED WITH: FRONT OPERATED POWER BACK GAUGE FRONT SUPPORT ARM SQUARING ARM FOOT PEDAL Location:  NJ
  • Yr:  1964 Equipped With: - 24" Rear Operated Manual Back Gauge - 4' Squaring Arm - Full Length Foot Treadle
  • Equipped With: Flush Floor Mounted Hurco Autobend 7 CNC Back Gauge Manual Crowning Die Holder Light Curtains Palm Buttons Floor Electric Foot Control Location:  MD
  • Equipped With: 36" FRONT OPERATED POWERED BACK GAUGE 2 FRONT ARM SUPPORTS FRONT OPERATED MANUAL RAKE CONTROL.(.002"-.026") FORWARD / REVERSE SINGLE / JOG AND CONTINUOUS MODES 1" x 3" KNIVES Location:  OH
  • EQUIPPED WITH: Front Operated Powered Back Gauge Ball Transfer Table Electric Foot Pedal 20 Horsepower Location:  CA
  • EQUIPPED WITH: Audemi PGP-401 Touch-N-Go Back Gauge Control 48" Back Gauge Sheet Support System 10' Squaring Arm Location:  CA
  • Year:  1988 EQUIPPED WITH: 48" CNC BACKGAUGE 12' SQUARING ARM ELECTRIC FOOT SWITCH CONTROL WEIGHT: 28,600 LBS
  • EQUIPPED WITH: 8" 3-Jaw Power Chuck Fanuc OiTC Control Tailstock Parts Catcher Foot Pedals Manuals RS-232 Flood Coolant Work Light 7/10 HP Main Motor Wired for 3 Phase, 60 Cycle, 220 Volts Overall Size: 104" L-R x 66" F-B x 75" High x 9,500 Lbs.
  • Model No. 7608 Equipped With: Automec CNC 300 Auto Back Gauge Accurpress ETS200 CNC Control Merlin ISB Safety Light Curtain Operator's Control Station Rear Access Safety Cage Foot Pedal Actuator Miscellaneous Dies Operator's Manuals 10-HP Motor 460/3/60 Excellent Condition
  • 3.3 cubic ft. U shaped tub rotates media to polish, deburr, peen all types of material. Uses a wide variety of media such as ceramics, steel shot, plastics to achieve mirror finishes on aluminum, steel and most metals. Included coolant tank on the rear of the unit sprays a fine mist into the tub to lubricate the parts and the standard 1 hr. timer can be set for short or long runs without constant attention. The urethane lining lasts for years and can be replaced when needed at the factory.
  • Clausing 20” Drill Press Mechanical Vari-Speed Series 2274 20” Floor, 300-2000 RPM Mechanical Vari-SPD, 3MT, 3 Phase Voltage (208,230,460) -  $5,145.00 2275 20” Floor, 200-1300 RPM Mechanical Vari-SPD, 3MT, 3 Phase Voltage (208,230,460) -  $5,145.00 2276 20” Floor, 150-2000 RPM 2 SPD Motor, Mech Vari-SPD 3MT, 230/3/60 - $5,395.00 2277 20” Floor, 150-2000 RPM 2 SPD Motor, Mech Vari-SPD 3MT, 460/3/60 - $5,395.00 EVS Series 2274EVS 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 230/3/60 and 220/1/60 Volt - $5,635.00 2274EVS4 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 460/3/60 Volt - $6,110.00 CNC Power Feed Series 2279CNC 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 230/3/60 and 220/1/60 Volt w/CNC Power Feed Unit - $10,110.00 2280CNC 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 460/3/60 Volt w/CNC Power Feed Unit - $10,585.00 Optional Accessories 1897 Key Type Chuck (1898 required) - $ 165.00 1898 Arbor for 1897 - $25.00 2215-1A-CNC CNC Dual Palm Button Cycle Start Single SPDL - $995.00 2216 Head Lift Mechanism - $615.00 2293AMT 43” Column in Lieu of Standard 66” - $85.00 2349AMT 90” Column in Lieu of Standard 66” - $215.00 7044 Coolant System for Floor Drill - $480.00 2371MT Mag. Starter Motor 110v Start/Stop Buttons - $1,040.00 (not required if ordering EVS or CNC Version) 2375MT 2 Speed Reversing Drum Switch and 2371MT (2276&77 only) - $1,270.00 2377MT Reversing Drum Switch and 2371MT (2274&75 only) - $1,300.00 302 Start/Stop Foot Switch for Spindle includes 2371MT - $1,155.00 (2274&75 only) 302R1 Start/Stop Foot Switch for Spindle, Rev Drum SW, includes 2377 (2274&75 only) - $1,585.00 302R2 Start/Stop Foot Switch for Spindle 2 Spd Drills Rev Drum SW, includes 2375MT (2276&77 only) - $1,585.00 303E E-Stop Switch (Mag Starter Option Required) - $375.00 (not required if ordering EVS or CNC Version) 7022 Magnetic Base Work Light - $110.00 20-LED 3 Watt 200 Lumen LED Work Light (head installed) - $110.00
  • Clausing 20” Drill Press Mechanical Vari-Speed Series 2272 20” Floor, 300-2000 RPM Mechanical Vari-SPD, 3MT, 1 Phase Voltage (115,220) Capacitor Start  - $5,145.00 EVS Series 2274EVS 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 230/3/60 and 220/1/60 Volt  - $ 5,635.00 2272EVS 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 115/1/60 Volt - $6,100.00 CNC Power Feed Series 2279CNC 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 230/3/60 and 220/1/60 Volt w/CNC Power Feed Unit -  $10,110.00 2281CNC 20” Floor, 50-2000 RPM, Electronic Vari-SPD, 3MT 115/1/60 Volt w/CNC Power Feed Unit - $10,585.00 Optional Accessories 1897 Key Type Chuck (1898 required) -  $ 165.00 1898 Arbor for 1897  - $25.00 2215-1A-CNC CNC Dual Palm Button Cycle Start Single SPDL -  $995.00 2216 Head Lift Mechanism - $615.00 2293AMT 43” Column in Lieu of Standard 66” - $85.00 2349AMT 90” Column in Lieu of Standard 66” - $215.00 7044 Coolant System for Floor Drill - $480.00 2371MT Mag. Starter Motor 110v Start/Stop Buttons - $1,040.00 (not required if ordering EVS or CNC version) 2377/1MT 1 Speed, 1 Phase Reversing Drum Switch w/ 2371 - $1,385.00 (not required if ordering EVS or CNC version) 302 Start/Stop Foot Switch for Spindle includes 2371MT - $1,155.00 (2272 only) 303E E-Stop Switch (Mag Starter Option Required) - $375.00 (not required if ordering EVS or CNC versions) 7022 Magnetic Base Work Light - $110.00 20-LED 3 Watt 200 Lumen LED Work Light (head installed) - $110.00 Location:  MI
  • Kalamazoo Industries S8HD 8 x 60 inch horizontal belt sander that’s designed for quick heavy duty clean up work on various ferrous and non-ferrous materials. Features air belt tension (air requirements 40 to 50 PSI), 7.5HP motor, easy belt tracking, reversible platen, simple part replacement and 28″ x 10″ work surface.
  • EQUIPPED WITH: FANUC I SERIES CNC CONTROL 16C COLLET MANUAL TAILSTOCK PROGRAMMABLE QUILL CHIP CONVEYOR PARTS CATCHER ** AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE ** REPLACEMENT COST NEW TODAY FOR ABOVE EQUIPPED MACHINE: $75,000
  • Standard Equipment: Two Speed Hydraulic Drive Hydraulically powered Lower and Side Bending Roll Adjustment Portable Control Console mounted on Wheels Hydraulic drop end Powered tilting of side bending rolls for cone bending Electronic Digital Readouts to indicate position of both side Bending Rolls
  • The Kalamazoo Industries S8W 8 x 60 Inch wet vertical belt sander features a platen work surface of 8″ W x 13″ H and adjustable work table with a work surface of 8″ x 12″ D, 7.5Hp 3PH TEFC motor, air belt tension that requires 40 to 50 PSI, pump and tank system.
  • The BG14 backstand grinder is a powerful 10HP 3PH unit with a 70 duro 14″ x 3″ contact wheel. This unit has easy setup, easy backstand tracking, easy clean out, vacuum attachment, magnetic switch, parts table, replaceable parts and isolation pads. The BG14 is great for steel foundries, aggressive grinding, descaling, deburring, and finishing. Location:  MI
  • The BG214 dual 3 x 132 inch heavy duty backstand grinder other features are easy access design that allows the operator to access the 14” x 3” contact wheel with full left to right movement so they can snag, roughing, contouring, angles and shaping 10HP 3PH 220V or 440V motor, isolation pads, replaceable v-belts. Location:  MI
  • S272V 2 x 72 inch belt grinder & vacuum base The Kalamazoo Industries model S272V 2 x 72 inch belt grinder & vacuum base features 3” and 1-1/2” quick-change contact wheels, plus a platen that rotates 365-degrees. This enables utilization of a single machine for grinding, shaping, contouring, flat work, angles, snagging and roughing. The grinder is mounted on a Kalamazoo Industries heavy-duty DCV-6 dust collector base.
  • TOYOTA 427FGCU25 5000 LBS CAP 80" MAX HEIGHT 58" LOWERED MAST HEIGHT 38" FORKS, LP GAS, UNIT RUNS AND OPERATES WELL
  • TOYOTA 427FG25 5000 LBS LIFT 80 MAX LIFT HEIGHT 58" LOWERED MAST HEIGHT 38" FORK TINES LP GAS UNIT RUNS AND OPERATES WELL Hours: 27500
  • • S6MS – 6″ x 48″ belt, variable position, direct drive, 1 lever quick belt release !!! • Cast iron frame, Full OSHA safety guard, Heavy duty steel stand. • 3 HP motor 3450 RPM, 1 phase or 3 phase, manual switch, 3500 SFPM • Reversible platen 6 1/2″ x 14″ (S6M) • Cast iron work table 6″ x 10″ with 1/2″ x 1/8″ slot • Option: JIC controls • Shipping dimensions: L 18″ x W 28″ x H32″ • Single phase amp draws: 110V 24 amps and 220V 12 amps. • Three phase amp draws: 220V 8.4 amps and 440V 4.2 amps. • Shipping weight: 230 lbs
  • Make: Toyota Model: 8FGU25 Year: 2013 Mast: 83/189” Tire: Pneumatic Capacity: 5000 Forks: 42” Meter Hours: 11400 Fuel: LP Attachment: Side shifter
  • Make: Toyota Model: 8FGU25 Year: 2013 Mast: 83/189” Tire: Pneumatic Capacity: 5000 Forks: 42” Meter Hours: 10500 Fuel: LP Attachment: Side shifter
  • EQUIPPED WITH: ADJUSTABLE RAKE ANGLE FRONT OPERATED POWER BACK GAUGE FOOT SWITCH BALL TRANSFERS ELECTRICAL: 460V/3PH/60HZ MOTOR: 20 HP  
  • • 6″ x 48″ Wet belt sander, 3 hp, 1 ph/220 or 3 ph/220/440 motor, Also available in 50 hz, 575 volt • Magnetic switch with 24 volt at pushbutton. • 3450 rpm motor w/ 2800 SFPM at belt. • Steel reverseable platen 6 1/2″ x 14″ • Multi-postion vertical thru horizontal, cast iron frame. • Cast Iron work table, 6″ x 10″ w/1/2″ x 1/8″ slot • 1 lever quick belt change, pre-set spring belt tension. • Full OSHA guard, heavy duty base • 1/4 hp coolant pump & 10 gal. tank w/ baffles.
  • Model S660MV • Multi-position, vertical thru horizontal ! 3 HP! Powerful ! • Removable and replaceable steel mesh filter. • Belt sander with heavy-duty enclosed stand and vacuum dust collector. • 6″ x 60″ belt DCV-6 dust collector base, 400 cfm, panel fiter. • Quick one lever abrasive belt changing! • Reversible steel platen , 6″ x14″,cast iron frame
  • MODEL S6MV • Multi-position, vertical thru horizontal ! 3 HP! Powerful ! • Removable and replaceable steel mesh filter. • Belt sander with heavy-duty enclosed stand and vacuum dust collector. • 6″ x 48″ belt ( same as S6MS). DCV-6 dust collector base, 400 cfm, panel fiter. • Quick one lever abrasive belt changing! • Reversible steel platen , 6″ x14″,cast iron frame
  • Model - S660MW • 3 HP, 1 PH or 3 PH, 3450 RPM • 6″ x 60″ wet belt sander, vertical/ horizontal • Steel platen – 6-1/2″ x 17″, 3500 SFPM • Cast iron table with 1/2″ x 1/8″ slot, cast iron frame, Heavy duty base. • Quick belt release, Full safety guard. • Constant spring belt tension, FAST 1 lever belt change !! • Magnetic switch, 24 volts at control • Coolant pump and tank, 10 gal. 1/3 HP
  • ~Additional state sales tax may apply~ Model #BSV-24 Accepts most standard blade widths from .25” to .75”. Offers 4 speeds, ranging from 80 to 318 fpm. Robust 2 hp motor runs on 220-volt single-phase power. Reliable gear-driven transmission saves you from having to replace broken belts or pulleys. Uses tungsten carbide blade guides as well as fully sealed ball bearings for smoothness and durability. Our adjustable blade guide design allows you to get as close as possible to the material for accuracy. We designed this vertical metal cutting band saw to let you cut out the center of the material without having to cut through it. Includes a blade welding station, complete with a shear and grinding wheel, for getting to the middle of a cut or repairing broken blades. Front panels give you easy access for blade alignment. 24” x 22” milled cast iron table pivots 10° front to back and 15° left to right for chamfer cuts. Electro-welded steel plate construction keeps the machine stable, minimizes vibrations, and maintains accuracy. Bright halogen work light helps you see exactly where the cut is. Location:  WI
  • Model: S460W 4″ x60″ belt, 3 hp 1 phase or 3 phase motor, Magnetic 24 volt switch. Heavy stand, pre set belt tension, one lever belt change 10 gal. pump and tank system Spindle RPM – 2800 Flood coolant – 10 gal tank, 1/3 hp pump, splash guards. Platen – 4″ x 17″, work table 4″ x 6″
  • Model: S460HV • 4″ x 60″ belt • 1 HP, 1 PH, or 3 PH • 4″ pulley, 3450 RPM, 3600 SFPM, Direct drive • Reversible platen 4″ x 17″ • Cast iron table 4″ x 6″ • Full OSHA guard, Easy tracking , Quick belt change ! • DCV-6 Vacuum base 400 CFM • Dimensions: L 18″ x W 26″ x H 60″, WT. 485 lbs. • Manual switch – please specify phase and voltage
  • 10" high speed non-ferrous saw. 3 HP TEFC, 3 PH 220/440V (please specify voltage) or 3 HP 1 PH 220V.
    • Capacities: 3.25″ diameter solid.
    • 3450 RPM at spindle.
    • 5/8″ spindle arbor.
    • Sealed ball bearings.
    • Manual switch.
    • V-belt driven.
    • Uses a high speed carbide tipped blade (not included).
    • Single quick release cam-lock vise.
    • OSHA safety clam shell blade guard.
  • ~Additional state sales tax may apply~ Item Number BSV-20VS 2 hp motor runs on 220-volt single-phase power. Wide 20.5" throat depth. 12.375” maximum cutting thickness. Accepts standard .25” to .75” blades. Cast iron table can pivot front to back and left to right. Includes a cast iron mitering system, rip fence, and protractor to make sure your cuts are straight and repeatable. Variable speed from 65 to 1640 fpm allows you to adjust the speed for cutting wood, metal, and even plastic. Change the speed with the hand wheel (just turn right for higher speed, left for lower). Digital readout lets you see the exact blade speed, so you can choose the right settings for your material and extend blade life. This band saw includes everything you need to cut out the center of the material without having to fix a cut through it. Manual shear lets you cut the blade, so you can run it through the workpiece, then weld it back together. Comes standard with a fully-integrated blade welder with a built-in grinder for finishing the weld joint—great for getting to the center of a cut or repairing blades. Thick steel plate framework minimizes vibrations to deliver accurate cuts and helps the machine last for many years. Air blowdown system cools the blade and keeps the saw clean from material chips and shavings. Halogen work light lets you see what you’re cutting more clearly.  
  • MODEL KM10HS 10" high speed non-ferrous mitre saw. 3 HP TEFC, 3 PH 220/440V (please specify voltage) or 3 HP 1 PH 220V. Manual switch. Wt. 300 lbs. Dimensions L 25 x W 24 x H 17. LESS BLADE. FOB: MI
  • MODEL HS1414 high-speed “straight-cut" non-ferrous saw. 5 HP, 3 PH 220 or 440 volt. Motor RPM 3450. Optional: 1,725 RPM motor. Wt. 250 lbs. Optional: 1,725 RPM motor. FOB: MI
  • MODEL HSM14 FOR CUTTING ALUMINUM AND OTHER NON-FERROUS MATERIAL WITH STEEL BLADE. 14" high speed mitre. 5HP TEFC, 3PH motor with magnetic starter, 3450 RPM. Please specify voltage. For non-ferrous only. Wt.750 lbs. Optional: 1,725 RPM motor. FOB:  MI
  • Model 3RSP 180/6 Standard Equipment: Hydraulically powered rear bending roll adjustment Electronic digital readout for rear bending roll position Hydraulic drop end Powered lower roll adjustment, with rapid gap adjustment Dual rotation controls - console mounted and remote hand control on trailing lead Upper and lower pinch rolls driven Cone bending attachment Powered tilting of the rear bending roll for cone bending Emergency stop cable at front and rear of machine Hydraulic oil, tools and manual Grooves in lower rolls for 1/4", 3/8", 1/2" FOB: Maryland  
  • Model US10375 Includes: 36" Power Operated Back Gauge w/ LED Readout 39" Squaring Arm Ball Transfers on Each Table Segment Manual Quick Change Blade Gap High Carbon, Hi Chrome Shear Blades FOB:  TX
  • MODEL KM14HS 14" high speed non-ferrous mitre saw. 5 HP TEFC, 3 PH 220/440V (please specify voltage) or 5 HP 1 PH 220V. Magnetic switch. Wt. 490 lbs. Dimensions L 26" x W 24" x H 50". LESS BLADE. FOB:  Michigan
  • Includes: Hurco CNC Back Gauge, Model Autobend 5C 4 Way Bottom Die - 1", 2", 3", 4" Openings - 12 ft x 5-1/4" OD Block Misc. Tooling Electric Foot Switch FOB: New Jersey  
  • MODEL S612V-1 6" BELT/12"DISC COMBINATION SANDER • 3 HP, 1 PH TEFC motor, 220V only, enclosed stand with built-in 100 CFM dust collector. Manual switch-overload protection. Wt. 500 lbs. MODEL S612V-3 6" BELT/12"DISC COMBINATION SANDER • Same as above, only 3 PH motor. 220 or 440V, please specify. Wt. 500 lbs.
  • MODEL S612-1 6" BELT/12"DISC COMBINATION SANDER • 3 HP, 1 PH, 220V only. TEFC motor with switch, enclosed stand; less dust collector. Wt. 380 lbs. MODEL S612-3 6" BELT/12"DISC COMBINATION SANDER • 3 HP, 3 PH, 220/440V, please specify. TEFC motor with switch, enclosed stand; less dust collector. Wt. 380 lbs.
  • Equipped With: INCH & METRIC THREADING 14" 4 JAW CHUCK CHIP PAN Location:  OH
  • EQUIPPED WITH:
    • 36" FRONT OPERATED POWER BACK GAUGE
    • 88" SQUARING ARM
    • SUPPORT ARMS
    • REMOTE FOOT PEDAL
    • RAKE ANGLE ADJUSTMENT
    • STROKE CONTROL
    SHIPS FROM: NJ
  • EQUIPPED WITH:
    • DIAL-A-BEND-SC CONTROL
    • RIGHT-HAND MACHINE (CLOCKWISE ROTATION)
    • HYDRAULIC MANDREL EXTRACTOR
    SHIPS FROM: NY
  • EQUIPPED WITH:
    • Counter-Clockwise Bending Head
    • Automatic 8-Position Turret Stop
    • Mandrel Extractor
    • Standard 9 Button Operator Pedestal
    • Flip Down DBB Tube End Stops
    SHIPS FROM: OH
  • EQUIPPED WITH:
    • HURCO AUTOBEND #7 CNC BACKGAUGE
    • TONNAGE CONTROL
    • REMOTE FOOT PEDAL
      SHIPS FROM: PA
  • EQUIPPED WITH:
    • Accurpress AP2 X,Y CNC Control, Manual Z
    • ETS pedestal
    • Die Rail
      SHIPS FROM: TX
  •   EQUIPPED WITH:
    • FANUC 31I-MODEL B CNC CONTROL
    • TOOL PROBE
    • COOLANT THRU SPINDLE
    • SPINDLE CHILLER
    • CHIP CONVEYOR
    • T-SLOTTED TABLE
    • ALL AVAILABLE MANUALS
    SHIPS FROM: NJ
  • EQUIPPED WITH:
    • Mitsubishi Meldas 500M CNC Controls,
    • Renashaw Probing,
    • 26' x 72" Planer Table,
    • Right Angle Head,
    • Coolant System,
    • 5 KVA Transformer
    SHIPS FROM: WI
  • EQUIPPED WITH:
    • Initial Pinch Configuration
    • Power Drop End
    • Power Roll Adjustment
    • Roll Position Indicator
    • NEW emergency stop safety switch and cable
    • NEW forward-reverse handheld pendant control
    SHIPS FROM: IA
  • EQUIPPED WITH:
    • 2-axis CNC control and back gauge
    • Microguard light curtains
      SHIPS FROM: IA
  • EQUIPPED WITH:
    • Front operated power back gauge
    • Squaring arm
    • Support arms
    • Spare set of blades
    • Foot pedal
      SHIPS FROM: IA
  • EQUIPPED WITH:
    • Air operated drop end
    • Forming roll geared
    • Power adjustment on forming roll
    • Forming and pinch rolls grooved longitudinally
      SHIPS FROM: IA
  • EQUIPPED WITH:
    • 2-Axis Hurco Autobend 5C CNC back gauge & control
      SHIPS FROM: IA
  • EQUIPPED WITH:
    • POWER BACK GAUGE
    • SQUARING ARM
      SHIPS FROM: IA
  • EQUIPPED WITH:
    • NEW rolling pedestal control includes:
      • (4) New joystick controls
      • (4) New digital roll position indicators
      • New Quick disconnect
      • New Emergency stop button
      • New Push/Pull style Stop/Start button
    • NEW wire encoders for roll positioning
    • NEW Emergency stop safety switches & cables - front and back
    • Emergency stop buttons on machine - front and back
    • Seals & hoses replaced as needed
      SHIPS FROM: IA
  • EQUIPPED WITH:
    • SQUARING ARM & (1) SUPPORT ARM
    • FRONT OPERATED POWER BACK GAUGE
    • HYDRAULIC & ELECTRICAL CONTROLS
    • REMOTE FOOT PEDAL
    SHIPS FROM: TX
  • EQUIPPED WITH:
    • Wysong PC100 Back Gage Controller with Single and Repeat Cycles
    • New Electric Foot Pedal Trip Control
    • (2) Adjustable 31" Long Front Material Support Arms
    • (1) 63" Long Squaring Arm (On Left Side) with (2) Adjustable Material Stops
    • Bijur Pressurized Lubrication System
    • Adjustable & Replaceable Ram Ways Wear Strips
    • Full Length Finger Guard
    • Mechanical Material Hold Downs
    • (6) Ball Type Material Supports Built in the Table
    • Manually Adjustable Cycle Brake
    • Overhead Light Bar with (3) Flood Lights
    • Air Actuated Mechanical Clutch – Compressed Air Required
    • Heavy Duty Pattern Machine, Flush Floor Design
    • 15 HP Main Motor, 230/460 Volts, 1760 RPM
    • 1/2 HP Back Gage Motor, 230/460 Volts
    • Wired for 3 Phase, 60 Hz, 230/460 Volts
    • Presently Wired for 440 Volt Operation
    • This Machine is in Very Good Physical and Running Condition
    SHIPS FROM: PA
  • EQUIPPED WITH:
    • 36" Front Operated Power Back Gauge w/Digital LED Display
    • Swing Up Back Gauge
    • 3 Position Foot Switch
    • Manual Quick Blade Clearance
    • Autogage Programmable Front Gauge
    • 4 Edge Blades
    SHIPS FROM: MD
  • EQUIPPED WITH:
    • CONTROLS
    • FOOT PEDAL ACTIVATION
    • 2) EXTENSION ARMS
    • SQUARING ARMS
    • MANUAL CENTRALIZED LUBE
    SHIPS FROM: OH